Annonces CMS 2607
Alerte nouvelle annonceForums CMS CMS 2607
News
Images
Vidéos
Fiche technique
- Fabricant : CMS
- Modèle : CMS 2607
- Catégorie : Synthétiseurs analogiques en rack
- Fiche créée le : 27/09/2016
A clone of the ARP 2600 analog synthesizer with added features
6 spaces high, yes! 10.5 inches. Thick .100 precision machined front panel.
It amazingly uses the original ARP 4000 series sub-module pin out. We can install your old ARP sub-modules from your trashed 2600!
The famous CMS 4012 CX filter comes standard issue. Better sounding but true to the original design of the early 2600 filter.
The filter has 2 modes: CMS and ARP. The ARP mode maintains the original factory 4012 circuit. The CMS mode features the CMS 9004 dual mode filter.
The VCF has an additional Highpass / Pseudo-notch out depending on the mode switch setting.
Voltage processor 2 becomes the Post Filter Distortion circuit from the ARP Centaur when the PFD switch is engaged.
Schmitt trigger or trigger detector for externally triggering Envelopes, SH, Etc. Doubles as a distortion device.
A dedicated LFO
S/H clock has sine out for additional LFO modulation.
Tripped out E switch
Octave switches
Sync switch that syncs VCO-1 to VCO-3
VCO3 has all 4 waveforms!!!
Uses the discrete wave-shapers from the 2500 - they sound much better and produce better shaped waveforms.
Both VCO-2 and VCO-3 actually produce a sine wave, not a rounded triangle like on the 2600.
PWM on all 3 VCOs.
More stuff I am forgetting.
Optional Items:
3 older type VCOs installed and calibrated.
Autres catégories dans Synthétiseurs
Autres dénominations : cms2607
