T-Rex Engineering Room-Mate

• Fabricant : T-Rex Engineering
• Modèle : Room-Mate
• Catégorie : Réverbs Guitare
• Fiche créée le : 29/04/2007

Manuel en Anglais

RoomMate combines the latest digital technology with outstanding analog tube construction - the result

is a vintage hall of the extra class. RoomMate can be used stereo or mono.

The four classic reverb programs are warmed up and thickened noticeably by placing them in one

Tube circuit are embedded. RoomMate’s phenomenal sound comes from the fact that

When the effect is switched on, the original signal also passes through the tube circuit. It is here

not a mere alibi tube - inside the device there is an operating voltage of 300 volts

the tube! The dry guitar signal does not pass through the A / D - D / A converter (although also the

are extremely high quality) - it remains completely analog.

Additional parameters help you to find exactly the reverb sound that best suits your game

is tailored.

Read these instructions carefully so that you can thoroughly test your new RoomMate

familiarize The better you know the pedal, the more you get back.

CONTROLLER AND SWITCH

It all starts with the MODE switch. You have the choice between four carefully programmed,

extremely distinctive reverb programs:

1. CLASSIC PLATE brings exactly the sound that you get from a good, medium-sized reverb plate

expect.

1. WARM HALL sounds big and warm and is an excellent live sound.
2. BRIGHT HALL sounds very expensive with a lot of detail, especially in the heights.
3. CHORUS with a shorter WARM HALL is just the thing for the acoustic guitar.

MIX This balance control mixes the original signal with the reverb signal. The further you go inTurn clockwise, the greater the reverberation sound, the direct signal comes in more and morethe background. If RoomMate is wired in series, you will find a controller position somewhereis between 9 a.m. and 1 p.m. Will RoomMate be used in a parallel effects loop of a guitar amplifier or as an effects device in oneMixer environment, you have to turn the control all the way to the right. Then theVolume of the Hall signal with the RETURN control on the mixer or in the effect loop onGuitar amplifier set. HIGH CUTThe HIGH CUT is a low pass filter. It reduces the high frequencies in the reverb tail by oneto achieve impressive vintage sound. The further you turn the control clockwise,the more high frequency components are suppressed without appearing dull. As I said,this control only affects the reverb sound, not the direct signal of your guitar. LEVELThis is the overall volume control. It controls the output volume of the pedal. Is the controllerAt 12 o'clock, the output signal reaches the next input with "Unity Gain", and beyond thatthe output signal can be raised by approx. 6 dB. SWITCH & LEDThe foot switch is used to silently switch the hall effect on and off. Is the effectswitched on, the red LED on the head end of the pedal lights up for checking. CONNECTIONSThe inputs and outputs of RoomMate offer you a lot of connection options and aredesigned to preserve the integrity of your sound. The real "Hardwire Bypass" ensuresthat your guitar sound reaches the amplifier completely unadulterated when the hall pedal is switched offis. Nevertheless, we believe that it sounds even better when RoomMate is switched on - becauseyes there is a tube in the output stage. Original and Hall signal are mixed together andthen tonally upgraded in the tube and provided with the necessary warmth.RoomMate can also be in an effect loop (serial or parallel) or in an AUX wayMixing desks are used (definitely try it out for vocal tracks!).INPUT6.3 mm mono jack. This is the entrance from RoomMate. Here you connect your guitar, or,when RoomMate is integrated into the effects loop of the amplifier, the output of the effectLoop (often referred to as SEND)

OUTPUT L & R

 These are the stereo outputs, also 6.3 mm jack sockets. Of course RoomMate sounds toomono already excellent, in stereo it sounds even more atmospheric, fat and lively. If you use RoomMate mono, only use the left output. From here you go toInput of your amplifier (or to the input of the effect loop, often referred to as RETURN).DC This is the 2 mm connection for the included power supply. POWER ADAPTER The supplied 12 volt DC power supply is used to supply RoomMate with power.It supplies a voltage of 800 mA at 100/115/230 VAC 50/60 Hz depending on the country of delivery. TheRoomMate's power consumption is 12 volts DC, 300 mA, 5 watts. Use only thatincluded power supply or a T-REX FuelTank power supply (FuelTank Classic or Juicy Lucy). T-REXassumes no guarantee for damage caused by a third-party power supply. TUBE In the RoomMate, a carefully hand-selected 12AX7 preamp tube does its work. OnTubes may not be replaced by the user to be damaged. Such an intervention will void the warranty. Otherwise we grant10 year guarantee on our factory installed tube! TECHNICALA / D and D / A converter: 24-bitHousing: aluminum, lilacDimensions: 100 x 120 x 35 mm plus 16 mm switches and buttons on the top plus 3 mm rubber feeton the bottom.Weight: 383 g net, 660 g in a box

Distribué par ADAGIO France