Stone Deaf FX Warp Drive

• Fabricant : Stone Deaf FX
• Modèle : Warp Drive
• Catégorie : Saturations multiples et autres saturations pour guitare
• Poids du colis : 611 g
• Fiche créée le : 26/12/2017

The Warp Drive is a high-gain Paracentric-Distortion filter and when we say high-gain we mean really high-gain! With its ultra-saturated cascading gain stage circuit, you can craft those often hard to get saturated tones you love with ease. From Sabbath-era hard rock metal, Pantera early 1990’s metal or even more modern metal tones like Mastadon, Bullet for My Valentine and Trivium, it’s all here in spades. The built-in noise gate allows for very tight rhythm playing and holds extremely well if you want to gain stack even further into the pedal. 

It’s not all about gain though. Without the control Warp Drive allows, most high-gain pedals will leave just a mush of distortion that can be hard to tame. Like no other pedal before it and with the built-in Paracentric EQ, you can refine your tone to cut through the mix or do novel layering techniques when recording different frequencies from the pedal. All of this gives you that huge sounding guitar tone so prominent in metal and hard rock music. 

Add a Stone Deaf EP-1 active expression pedal to the expression input control and on top of the impressive regular tone shaping features, Warp Drive can also be used for high gain wah, phaser as well as the ability to control your tone on the fly with your foot. 

*** Please note *** 

The expression input will only work with Stone Deaf EP-1 active expression pedal. 

Each Warp Drive is proudly manufactured by Stone Deaf in our factory based in Huddersfield, West Yorkshire, England. 

• Vast gain range - from light crunch to lean mean metal tones 

• Switchable Noise Gate - for super-tight high-gain tones 

• Highly sculptable Paracentric EQ - for perfect tones with any rig 

• Phaser/Wah functionality via Stone Deaf EP-1 active expression pedal 

• Top-mounted I/O 

• Handmade in the UK 

• True-Bypass switching 

• Powered by opt. 9V PP3 battery or PSU (9V DC, centre -, 2.1mm, ~55mA current draw) 

The Current Draw of the Warp Drive is about 55mA. It works off a 2.1mm centre negative (Boss Style) adaptor. If using battery we recommend using a lithium 9v battery as Alkaline are unstable.

Power supplies should be fully Isolated.