Historique des updates
- 2 réponses
- 2 participants
- 450 vues
- 1 follower
Anonyme
521397
Voici une lettre de roland decrivant precisement ce qui a été fixé dans les updates.
c'est en anglais....mais quelqu'un peut la traduire...
Please find listed below the updates and versions of MC-909.
VER.1.10
* The following has been improved.
[Create Rhythm] function also added to the Sample list. A Rhythm Set
can be created from multiple samples.
[LOAD] and [ERASE] multiple samples simultaneously from the Sample
list and File Utility.
[Extract a Rhythm Instrument] function added to the Pattern edit.
Able to extract data of a specific note number from the specified
part, and move it to another part.
[Step REC] function added to Arpeggio edit. When creating Arpeggios,
able to step record, or input notes one by one.
Maximum note storage for each Pattern increased from approx. 12,000
notes to approx. 30,000 notes. Please note that the maximum note
storage of the entire MC-909 has not changed (approx. 1,300,000
notes).
Level meter added to the Mastering screen.
RPS realtime modifying capability. Modify the sound of the phrase
being played by RPS (panel knobs and sliders).
VER.1.11
* The following problems have been fixed.
When you playback a song, and about an hour later, pattern cannot be
changed.
If you use the [Enter] button to select from the form list, you can
select only the first and the last one.
After using TIE function several times, note will freeze.
During you playback the pattern selected with PATTERN CALL, Setup
parameter may get back to previous setting.
VER.1.12
* The following problems have been fixed.
In the pattern, if the measure tune containing SYS-EX is eliminated
and being saved after that, a performance will become strange.
VER.1.13
* The following problems have been fixed.
The MUTE ON/OFF function does not operate with push-button, even
though the data is contained in the MUTE CONTROL PART.
In Patch, the LFO DEPTH can be changed only from 0 to + 63, except
the state where all of four TONE(s) are selected in the state of TONE
SELECT.
(The correct value should be from - 64 to + 63.)
In the Pattern containing the SYS-EX, it may hang up when edit the
measures that contains the SYS-EX of MUTE/ CONTROL PART.
c'est en anglais....mais quelqu'un peut la traduire...
Please find listed below the updates and versions of MC-909.
VER.1.10
* The following has been improved.
[Create Rhythm] function also added to the Sample list. A Rhythm Set
can be created from multiple samples.
[LOAD] and [ERASE] multiple samples simultaneously from the Sample
list and File Utility.
[Extract a Rhythm Instrument] function added to the Pattern edit.
Able to extract data of a specific note number from the specified
part, and move it to another part.
[Step REC] function added to Arpeggio edit. When creating Arpeggios,
able to step record, or input notes one by one.
Maximum note storage for each Pattern increased from approx. 12,000
notes to approx. 30,000 notes. Please note that the maximum note
storage of the entire MC-909 has not changed (approx. 1,300,000
notes).
Level meter added to the Mastering screen.
RPS realtime modifying capability. Modify the sound of the phrase
being played by RPS (panel knobs and sliders).
VER.1.11
* The following problems have been fixed.
When you playback a song, and about an hour later, pattern cannot be
changed.
If you use the [Enter] button to select from the form list, you can
select only the first and the last one.
After using TIE function several times, note will freeze.
During you playback the pattern selected with PATTERN CALL, Setup
parameter may get back to previous setting.
VER.1.12
* The following problems have been fixed.
In the pattern, if the measure tune containing SYS-EX is eliminated
and being saved after that, a performance will become strange.
VER.1.13
* The following problems have been fixed.
The MUTE ON/OFF function does not operate with push-button, even
though the data is contained in the MUTE CONTROL PART.
In Patch, the LFO DEPTH can be changed only from 0 to + 63, except
the state where all of four TONE(s) are selected in the state of TONE
SELECT.
(The correct value should be from - 64 to + 63.)
In the Pattern containing the SYS-EX, it may hang up when edit the
measures that contains the SYS-EX of MUTE/ CONTROL PART.
o-x-o
896
Posteur·euse AFfolé·e
Membre depuis 21 ans
Bon bah, j'ai plus qu'a mettre a jour la FAQ
Sinon le mec qui a poste ca sur yahoo (de Roland UK si je me souviens bien), c'est le contact a qui tu as envoye le petit mail de features a ajouter ?
Sinon le mec qui a poste ca sur yahoo (de Roland UK si je me souviens bien), c'est le contact a qui tu as envoye le petit mail de features a ajouter ?
Anonyme
521397
- < Liste des sujets
- Charte