Annonces Evid 3-2
Alerte nouvelle annonceForums Electro-Voice Evid 3-2
Images
Fiche technique
- Fabricant : Electro-Voice
- Modèle : Evid 3-2
- Série : Evid
- Catégorie : Accessoires sono
- Poids du colis : 4.4 kg
- Fiche créée le : 15/11/2005
Ultra compact, two-way full-range system with an appealing design, lightweight, also
for outdoor use, with a high-quality 70/100V - transformer
• 2 x 3.5’’- mid-bass-driver with a moisture-resistant special membrane in a
vented enclosure
• 0.75’’-titanium dome tweeter with Neodymium magnet structure
• symmetrically located HF-section with Coherent Coverage Waveguide TM in
combination with physically shaded woofers for minimized vertical lobing
effects and improved vertical off-axis frequency response
• integrated crossover with passive limiter for the LF-chassis and the HF-driver
• the system is magnetically shielded and can be used near screens and
monitors without any disturbances in the display
• transformer taps: 70V: 5W, 100V: 10W
• ellipsoid enclosure constructed of acrylic butyl styrene (ABS)
• black ABS enclosure (the ABS has to be imbued to prevent changes to the
colour in case of scratches)
• moisture- and weather-resistant to MIL-Spec 810, IEC 529 and IP 34 test
conditions
• full-face protected by a powder-coated, zinc-plated grille, backed with acoustic
fleece for the prevention of dust and moisture
• including robust, multi-axial Strong Arm Mount (SAMTM )
• horizontal swing: 100°; vertical rotation: +/-45° (if the speaker is mounted with
the long axis in the vertical plane)
• mounting bracket allows nearly invisible mounting, the final position can be
fixed with two hexagon head screws
• additional safety point on rear side
• spring terminals for cable cross sections up to 4 mm²
Technical specifications:
Frequency response
(-10dB)
85 Hz to 20 kHz
Nominal coverage (-6 dB) 120°H x 100°V
Maximum long-term average power-
handling capacity (per IEC 268-5)
10 W / 100 V
5 W / 70 V
Sensitivity (1W/1m), 87 dB
Max. SPL (calc., full space) (1m) 97 dB
Dimensions (W at front x H x D) max. 127 x 234 x 165 mm
for outdoor use, with a high-quality 70/100V - transformer
• 2 x 3.5’’- mid-bass-driver with a moisture-resistant special membrane in a
vented enclosure
• 0.75’’-titanium dome tweeter with Neodymium magnet structure
• symmetrically located HF-section with Coherent Coverage Waveguide TM in
combination with physically shaded woofers for minimized vertical lobing
effects and improved vertical off-axis frequency response
• integrated crossover with passive limiter for the LF-chassis and the HF-driver
• the system is magnetically shielded and can be used near screens and
monitors without any disturbances in the display
• transformer taps: 70V: 5W, 100V: 10W
• ellipsoid enclosure constructed of acrylic butyl styrene (ABS)
• black ABS enclosure (the ABS has to be imbued to prevent changes to the
colour in case of scratches)
• moisture- and weather-resistant to MIL-Spec 810, IEC 529 and IP 34 test
conditions
• full-face protected by a powder-coated, zinc-plated grille, backed with acoustic
fleece for the prevention of dust and moisture
• including robust, multi-axial Strong Arm Mount (SAMTM )
• horizontal swing: 100°; vertical rotation: +/-45° (if the speaker is mounted with
the long axis in the vertical plane)
• mounting bracket allows nearly invisible mounting, the final position can be
fixed with two hexagon head screws
• additional safety point on rear side
• spring terminals for cable cross sections up to 4 mm²
Technical specifications:
Frequency response
(-10dB)
85 Hz to 20 kHz
Nominal coverage (-6 dB) 120°H x 100°V
Maximum long-term average power-
handling capacity (per IEC 268-5)
10 W / 100 V
5 W / 70 V
Sensitivity (1W/1m), 87 dB
Max. SPL (calc., full space) (1m) 97 dB
Dimensions (W at front x H x D) max. 127 x 234 x 165 mm
Distribué par MSC Distribution
»
Autres catégories dans Sonorisation
Autres dénominations : evid 3 2, evid32, evid3 2