Se connecter
Se connecter

ou
Créer un compte

ou
Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos
Fender Hot Rod Deluxe III
Photos
1/402

Tous les avis sur Fender Hot Rod Deluxe III notés 3/5

4.1/5
(11 avis)
45 %
(5 avis)
27 %
(3 avis)
18 %
(2 avis)
9 %
(1 avis)
Donner un avis
Avis des utilisateurs
  • SlapKidSlapKid

    Pour le prix, bof

    Fender Hot Rod Deluxe III Publié le 08/04/16 à 23:10
    testé 2 jours à bon volume, voici mes observations
    Pas de bruit de fond coté section de puissance, très bon point.
    La construction acoustique est bonne, le panneau du hp est monté flottant comme sur feu mon bassman ou mon bandit transtube ce qui donne au hp de la diffusion supplémentaire ainsi que de la souplesse.
    Le hp est monté décentré ce qui semble favorable à la qualité du son.
    Du coup le celestion g12p80 monté d'origine sonne bien dans ce combo (alors que je le connais plutot moche-fade-sombre ailleurs).
    La section puissance (après entrée power in) est bien sensible, idéale pour amplifier un préampli externe (genesis one dans mon cas) et c'est heureux car le préampli embarqué es…
    Lire la suite
    testé 2 jours à bon volume, voici mes observations
    Pas de bruit de fond coté section de puissance, très bon point.
    La construction acoustique est bonne, le panneau du hp est monté flottant comme sur feu mon bassman ou mon bandit transtube ce qui donne au hp de la diffusion supplémentaire ainsi que de la souplesse.
    Le hp est monté décentré ce qui semble favorable à la qualité du son.
    Du coup le celestion g12p80 monté d'origine sonne bien dans ce combo (alors que je le connais plutot moche-fade-sombre ailleurs).
    La section puissance (après entrée power in) est bien sensible, idéale pour amplifier un préampli externe (genesis one dans mon cas) et c'est heureux car le préampli embarqué est juste très mauvais, zéro définition un gros tas boueux. Oubliez carrément l'autre canal tant c'est horrible.
    La puissance est là, et via le genesis one le son est plutot très bon meme après une heure a fort volume.
    Constat positif dans ce cas de figure donc. Autant prendre le blues deluxe en fait, plus joli meme section de puissance.

    Là ou ca va pas c'est la construction de la partie électronique du machin, c'est carrément cheapo de chez cheap, une honte au prix demandé. De plus c'est carrément indémontable sans risquer d'abimer quelquechose. Les lampes de puissance sont tete en bas et directement sur circuit imprimé, fiabilité zéro à moyen terme déjà...
    Faites vous votre propre idée via gougle images, je trolle pas.

    Je pense donc que c'est de la camelote, à moins d'avoir 50 pour cent de rabais laissez béton. Dommage, car le rendu via préampli externe est plutot vivant et sympathique, et c'est pas trop lourd à trimballer. Notez que la reverbe et la présence fonctionnent après l'entrée power in, cool.
    Lire moins
  • iamqmaniamqman

    Beaucoup mieux maintenant

    Fender Hot Rod Deluxe III Publié le 21/04/11 à 00:51
    contenu en anglais (contenu en anglais)
    There are a couple new features in the Hot Rod Deluxe lll that are very important to me. The first one being that speaker that is standard is actually usable. They used to have some cheap speaker in there that wasn't very musical and a lot of guys would switch out the speaker for something much more sweeter in tone. The next feature is a usable gain channel two and three. Before they gain channels were so bad that I never even used them. They sounded terrible and nothing like a tube amp distortion.


    Fender Hot Rod Deluxe III Combo Guitar Amplifier Features at a Glance:

    * Amplifier type: Tube
    * Output power: 40W
    * Speaker: 1 x 12" Celestion G12P-80, 8-ohm speaker
    * Output impedance: 4 ohms or 8 ohms
    * Preamp tubes: 3 x 12AX7
    * Power tubes: 2 x 6L6
    * Rectifier: Solid state
    * Inputs: 2
    * Channels: 3 selectable channels (Normal, Drive, and More Drive)
    * Controls: Presence, Reverb, Master Volume, Middle, Bass, Treble, Drive select switch, Drive Volume, Bright switch
    * Effects: Spring reverb
    * Effects loop: Preamp output/power amp input
    * Speaker jack: Extension speaker jack
    * Covering/grille cloth: Black textured-vinyl covering with Blackface-style black/silver grille cloth
    * Height: 18.75"
    * Width: 23.5"
    * Depth: 10.5"
    * Weight: 45 lbs.
    * Footswitch: 2-button, 3-function footswitch included
    * Cover: Amplifier cover included

    UTILIZATION

    Details
    Type Tube
    Number of Channels Three
    Power 40W
    Speakers 1 x Celestion G12P-80
    Effects No Effects
    Reverb Yes
    EQ Treble, Bass, Middle
    Amp Modeling No Modeling
    Number of Models 0
    Number of Tubes 5
    Preamp Tubes 3 x 12AX7
    Power Tubes 2 x 6L6
    Inputs 2 x Instrument
    Outputs 1 x Speaker
    Footswitch I/O Yes
    Effects Loop Yes
    Height 18.75"
    Width 23.5"
    Depth 10.5"
    Weight 45 lbs.

    SOUNDS

    Now that they have a usable gain channel then this amp has much more flexibility that before. The old amps were just outright sloppy. The bad thing is that these amps are made in Mexico. So they are going to be cheaper made and will break down on you a lot quicker. I'm not sure if they fixed the jewel light from going out on this model. Everyone who owned this amp knows that the light always goes out on these things.

    Anyway, use this amp with any nice guitar. I like this amp with a solid Gibson Les Paul. I used it with a Line 6 Dl4 and a Ibanez Ts9 and I had some great tones that cut through the band quite well.

    OVERALL OPINION

    If you are on the market for a good tube amp that has two moderate low gain but usable gain then this might be the amp for you. However I would never buy this amp since its made in Mexico. For the price of this amp I would buy a used Marshall JCM2000. At new these amps come in at around $700. You can even pick up a Peavey 5150 for the price of this thing.