Scott Sommerfeldt a 416
- Mon ancien matos
- Mon matos actuel
- Mon futur matos
Argus du Scott Sommerfeldt a 416
Attention, cette cote argus a plus de 6 mois.
Les prix indiqués dans les petites annonces des particuliers sur Audiofanzine ne sont pas nécessairement les véritables prix de vente ou d'achat.Les annonces avec options, ou constituant un pack, ne sont pas prises en compte.
Fiche technique
- Fabricant : Scott Sommerfeldt
- Modèle : a 416
- Catégorie : Amplificateurs Hi-Fi
- Autres dénominations : a416
Outup power : 20Watts, minimum continuous RMS power output per channel both channel driven into 8 ohms fron 20 to 20,000 Hz with no more than 0,5% total harmonic distortion.
Maximum total harmonic distorsion : 0.5%
Maximum intermododulation distorsion from 0.5Watt to rated output : 0.3%
Input Sensibility
Phono : 2.5mV
Mic : 6mV
Aux : 150mV
Tuner : 150mV
Tape : 150mV
Signal to noise ratio, weighted (input shorted)
Mic : 75dB
Phono : 70dB
Aux : 80dB
Tuner : 80dB
Tape : 80dB
Frequency response at 1watt + ou - 1dB
Phono 20 to 20,000 Hz
Aux : 16 to 32,000 Hz
Phono overload (maximum input signal before clipping) : 100mV
Mic overload : 220mV
Input Impedance
Phono : 47,000 ohms
Mic : 47,000 ohms
Aux : 60,000 ohms
Tuner : 60,000 ohms
Tape : 60,000 ohms
Separation
Photo : 42dB
Aux : 46dB
Speaker load impedance : 8 to 600 ohms
Headphone output impedance 8 to 600 ohms
Damping factor : 35
Controls
Bass control range : +/- 10dB at 100Hz
Treble control range : +/- 10dB at 10,000Hz
Loudness compensation : 3dB at 10,000Hz and 7dB at 100Hz
Power Line requirements
Line voltage and frequency : 220VAC; 60Hz
Power comsumption - full load : 190watts
Power consuption - idle : 8 watts
Dimensions
Height : 12,5cm
Width : 35,0cm
Depth : 28,5cm
Net weigth : 7,2kg
Shipping weigth : 8,2kg
