Darkglass Electronics Microtubes B3K V2
+

Darkglass Electronics Microtubes B3K V2

  • J'aime
  • Tweet
  • Pin it

Microtubes B3K V2, Distorsion/Overdrive/Fuzz Basse de la marque Darkglass Electronics.

Neuf à partir de 199 € prix moyen : 212 €

Fiche technique Darkglass Electronics Microtubes B3K V2

  • Fabricant : Darkglass Electronics
  • Modèle : Microtubes B3K V2
  • Catégorie : Distorsions/Overdrives/Fuzz Basse
  • Fiche créée le : 20/10/2017

With the Microtubes B3K v2 you get all the features of the original, with the ability to restore the mids for natural character. The attack switch has been replaced by the tone knob, giving much more control of the higher harmonic content (3 kHz to 8 kHz). The grunt switch is still present, as you would expect. The addition comes in the form of a mid boost, giving you a subtle 6dB boost from 300 Hz to 1 kHz to help you cut through a bit more. Fundamentally the Microtubes B3K is the same pedal we designed nearly a decade ago, aimed to give you a perfect combination of brutality and clarity. You can guarantee that this pedal will deliver defined and powerful saturation in an intuitive format.

  • If you want to get Fuzzy tones out of the Microtubes, you can do so by rolling down the tone control of your bass, if it´s passive, or treble if it has an active preamp, and set the Grunt switch to Fat mode, this will provide some mean , hysteric, woolly tones!
  • Level: Controls the level of the Overdriven Signal.
  • Blend: Allows to mix exactly how much clean signal you want to mix with the Overdriven.
  • Drive: Sets the amount of gain for this pedal.
  • Grunt Switch: Choose between 3 different Bass boost levels before the gain stages. This interacts with the Drive knob, so you can choose how much of bass you want to saturate
  • Attack Switch: This switch features the same “Ultra Hi” option in most tube bass amps. And it allows you to choose how much treble content you want to saturate. The Boost setting gives more clarity, presence and definition. The Off option will round up your sound, making it a bit warmer and less sharp.
  • For ecological reasons, non of our products will ever again include battery snaps! The B3K can be powered with a regulated 9V power supply (center negative). You can also experiment with 12V power supply for extra headroom.
  • Indestructible Relay True bypass! Still True bypass, except that it won’t break. Ever.
  • Original Design featuring Hybrid JFET and CMOS gain stages for a natural dynamic response.

Distribué par Quintessence-Instruments

»

Acheter neuf Darkglass Electronics Microtubes B3K V2

Star's Music
(244 avis)
Microtubes b3k v2 bass overdrive 199 €
Pourlesmusiciens.com
(68 avis)
Microtubes b3k v2 bass overdrive 199 €
Effect on Line
(32 avis)
Microtubes B3K v2 249 €

News Darkglass Electronics Microtubes B3K V2

Des V2 pour les Microtubes B3K et B7K de Darkglass

Des V2 pour les Microtubes B3K et B7K de Darkglass

2 Publiée le 20/10/17
Le spécialiste des préamplis et de la saturation pour bassiste vient d'annoncer de nouvelles versions de deux de ses pédales.

Images Darkglass Electronics Microtubes B3K V2

  • Darkglass Electronics Microtubes B3K V2
  • Darkglass Electronics Microtubes B3K V2
  • Darkglass Electronics Microtubes B3K V2
  • Darkglass Electronics Microtubes B3K V2

Vidéos Darkglass Electronics Microtubes B3K V2

Découvrez d'autres produits !

Autres dénominations : microtubesb3k v2, microtubesb3kv2, microtubes b 3k v 2, microtubes b3 k v2, microtubesb3 kv2

Forums -Darkglass Electronics Microtubes B3K V2

Les cookies assurent le bon fonctionnement de nos services. En utilisant ces derniers, vous acceptez l'utilisation des cookies. En savoir plus.