Argus du Zähl Elektronik-Tontechnik IM1 M/S Insert Master
Avertissement
Attention, cette cote argus a plus de 6 mois.
Les prix indiqués dans les petites annonces des particuliers sur Audiofanzine ne sont pas nécessairement les véritables prix de vente ou d'achat.Les annonces avec options, ou constituant un pack, ne sont pas prises en compte.
Où acheter IM1 M/S Insert Master ?
Moins
Meilleur prix neuf
Voir plus d’offres
Fiche technique
- Fabricant : Zähl Elektronik-Tontechnik
- Modèle : IM1 M/S Insert Master
- Catégorie : Autres effets studio
- Poids du colis : 1.7 kg
- Autres dénominations : im1 m s insertmaster, im1msinsertmaster, im 1 m s insert master, im1 msinsertmaster, im1m s insert master
Module d'insert stéréo master au format 500 avec Mid/Side
- stereo design for mix & mastering as well as voices & instruments
- highly musical design
- intuitive, user-friendly, self-explaining layout
- lowest noise and distortion signal paths built with highest quality components
- no microprocessor, no clock pulses, sequential logic only
- individual power stabilization on each module, no switched power circuitry
- number of I/Os exceeds API 500 standard, connector extension included:
- upgrade to special rear panel for Zähl Rack 500 series with additional XLR Insert I/Os or
- additional 1 slot front panel with 4 XLR Insert I/Os as adaption to standard 500 series rack - all other specs compatible with API 500 series specs, basic unit occupying two slots
- Input Stage:
- electronically balanced, max. level > +26dBu
- INPUT GAIN range +/- 10dB, L/R BALANCE range +/- 2,5dB
- GAIN and BALANCE with trimmed zero position
- SIGNAL LED (green) level present, individual Left/Right
- O/L LED (red) overload warning, individual Left/Right
- Insert:
- SEND BOOST control with up to 20dB gain at INSERT send
- RETURN RATIO crossfader for DRY/WET mixing at INSERT return for parallel compressing, EQing etc.
- Z-Switch - impedance selection for Insert Returns. Optimum sound results by impedance matching, e.g. when inserting vintage equipment.
- switchable MID/SIDE STEREO conversion on INSERT SEND/RETURN allowing different processing of MID and SIDE signals – using mono EQs, compressors, etc.
- comprehensive MONITORING controls for L and R, or MID and SIDE signals at insert SEND and RETURN points
- ON/OFF switch bypasses all INSERT functions
- Stereo Base:
- Circuitry based on MID/SIDE technique provides continuously variable adjustment starting from center position (STEREO):
- Narrow STEREO BASE by turning counterclockwise towards MONO.
- Widen STEREO BASE by turning clockwise towards DIFFERENTIAL signal. - Use CONSTANT MID option to “soften” the effect when turning clockwise to DIFFERENTIAL.
- ON/OFF switch bypasses STEREO BASE stage
- Circuitry based on MID/SIDE technique provides continuously variable adjustment starting from center position (STEREO):
- Output Stage:
- electronically balanced, max. level > +26dBu
- OUTPUT GAIN range +/- 10dB, L/R BALANCE range +/- 2,5dB
- GAIN and BALANCE with trimmed zero position
- SIGNAL LED (green) level present, individual Left/Right, also monitoring INSERT RETURN
- O/L LED (red) overload warning, individual Left/Right, also monitoring INSERT RETURN
- Overall BYPASS, also bridging I/O GAIN stages
»
News
Vidéos
Autres catégories dans Effets et périphériques de studio
Où acheter IM1 M/S Insert Master ?
Moins
Meilleur prix neuf
Voir plus d’offres