Annonces Honey
Alerte nouvelle annonceForums Acustica Audio Honey
News
Images
Fiche technique
- Fabricant : Acustica Audio
- Modèle : Honey
- Catégorie : Tranches de console logicielles
- Fiche créée le : 28/05/2015
Virtual channel strip based on a '70s console with EQ, mic pre and VCA stage, in VST/AU plug-in format for tracking, mixing and mastering on Mac OS X and Windows
- Output gain controls the output level.
- The MIC-PRE button enables (lamp ON) or bypasses (lamp OFF) the preamp stage of Honey.
- The VCA MAIN OUT button enables (lamp ON) or bypasses (lamp OFF) the VCA stage of Honey.
- BYPASS button sets to bypass the plug-in (lamp ON) ) or not-bypasses (lamp OFF)
- Input Trim: This knob sets the input level from -24dB to +24dB, and is used to control the signal level inside the eq, the output level is than automatically compensated by the same amount of gain. At the first execution of the plug-in, input is set to ensure that you feed an appropriate level from the first stage of your signal path to the final one.
- INPUT – OUTPUT LED METER measure the input (upper meter) and output (lower meter) levels of the plug-in.
Each band is controlled independently by an identical set of controls; sections are Low Frequency, Mid Frequency 1, Mid Frequency 2 and High Frequency, each section has controls for:
- Frequency
- Cut/Boost
In addition there are two buttons for low and high band that enable shelf mode.
Frequencies:
Here the list of available frequencies for each band:
- Low Frequency: from 35Hz to 620Hz;
- Mid Frequency 1: from 200Hz to 3200Hz;
- Mid Frequency 2: from 400Hz to 6400Hz;
- High Frequency: from 800Hz to 14kHz;
Cut/Boost (dB):
- Cut/boost values range from -12dB to 12dB.
High and Low cut filters:
- High Cut Frequency: from 25Hz to 2100Hz;
- Low Cut Frequency: from 500Hz to 26kHz;
Sampling rates:
- 44,1 kHz
- 48 kHz
- 88,2 kHz
- 96 kHz
»
Autres tranches de console logicielles Acustica Audio
Autres catégories dans Packs de plug-ins et Multi-effets
Autres dénominations : h 1 y