Akai Professional GX-635D

• TECHNICAL DATA

TRACK SYSTEM: 4 track 2 channel stereo/monaural system

REEL CAPACITY: Up to 10-1/2" reel

TAPE SPEED: 19 cm/s ±0.8% (7-1 /2 ips) 9.5 emfs ± 1.0% (3-3 /4 ips) (Pitch control: more than ±6%)

WOW & FLUTTER:

Less than 0.03% WRMS at 19 cm/s

Less than 0.04% WRMS at 9 .5 emfs

Less than 0.08% DIN 45500 at 19 cm/s

Less than 0.10% DIN 45500 at 9.5 emfs

FREQUENCY RESPONSE:

30 to 27 ,000 Hz ± 3 dB at 19 cm/s using WR Tape

30 to 21,000 Hz ±3 dB at 9.5 cm/s using WR Tape

30 to 25,000 Hz ±3 dB at 19 cm/s using LN Tape

30 to 19,000 Hz ±3 dB at 9.5 emfs using LN Tape

DISTORTION: (1,000 Hz "0" VU) Less than 0.5% at 19 cm/s

SIGNAL TO NOISE RATIO: Better than 62 dB DIN 45500

ERASE RATIO: Better than 70 dB (at 1,000 Hz)

CROSS TALK: Better than 40 dB (at 1,000 Hz)

CHANNEL SEPARATION: Better than 55 dB (at 1,000 Hz)

BIAS FREQUENCY: l00kHz

HEADS (6): Two GX Recording Heads, Two GX Playback Heads, Two Erase Heads

MOTORS (3): One AC Servo Motor for Capstan Drive Two AC Eddy Current Motors for Reel Drive

REAL TIME COUNTER: Up to 99 min 59 sec, less than ±1.5%

FF & RWD TIME: 120 sec using 550m (1 ,800 ft.) Tape

OUTPUT JACKS Line (2): 0.775V (0 VU) Required load impedance: more than 20 kohms

Phone (1): 100 mV/8 ohms

INPUT JACKS: Microphone (2): 0.25 mV Required microphone impedance: 600 ohms

LINE (2): 70 mV, impedance 100 kohms

DIN JACK: Input 2.0 mV, impedance 10 kohms, Output 0.3V

DIMENSIONS: 440(\V) x 483(H) x 256(D) mm, (17.4 x 19.0 x 10.1")

WEIGHT 21 kg (46.4 lbs)

POWER REQUIREMENT:

l00V, 50/60 Hz for JPN / 120V, 60 Hz for US & Canada

220/240V, 50 Hz for Europe, UK and Australia

110/120/220/240V, 50/60 Hz internally switchable for other countries

* Specifications determined with Akai LN-150-7 or SCOTCH #211 tape unless otherwise noted