Sampleurs Emu série Emulator 4

Citation : EOS OS Upgrades
1. Download the files and uncompress if necessary.
2. Place a high density floppy in your floppy drive
3. Launch the EOS/FlashPrep executable (.exe) and type the drive letter "a" of your floppy drive.
4. Once the disk image is complete place the floppy in your sampler and turn it on. Always use Flash Prep 1st when required as part of your OS upgrade.


EOS 4.62 Classic Plus Classic Flash Prep:
This OS is for E4 classic samplers only and requires a minimum of 2Mb CPU Flash. Installation of this OS also requires you use classic Flash Prep prior to loading the OS. Flash Prep is included in the ZIP file. To find your CPU Flash amount > Boot the sampler, go to Master/Utils/About/Config-you will see in the display your CPU Flash amount. If it is less then 2MB you will need to install EOS Classic 2.8. If you need assistance please call E-MU tech support at 831-438-1921 xt. 4.

Citation : If you have any other model, you may or may not have enough CPU Flash memory. To check how much CPU Flash memory you have available, press "Master/Utils/About/Config" to view your system configuration. If the CPU Flash memory is 1MB, you will need to replace the current CPU Flash memory with a 2MB CPU Flash SIMM from E-MU. The EOS V4 upgrade kit (EMU Part Number 6853) which contains the 2MB CPU Flash SIMM that you require, together with the operating system disks and full instructions on installation, is available from E-MU dealers and direct from E-MU.