Se connecter
Se connecter

ou
Créer un compte

ou
FR
EN
Où acheter TR-8 ?
Moins
Aucun revendeur ne propose ce produit pour le moment.
Alerte disponibilité
Alerte nouvelle annonce

Mise à jour de firmware version 1.12

  • 28 réponses
  • 12 participants
  • 7 512 vues
  • 12 followers
Sujet de la discussion Mise à jour de firmware version 1.12
Une nouvelle version du firmware vient de sortir : la 1.12
Citation :
Switching the pattern sequencer’s operating mode
Now you can change the operating mode of the pattern sequencer.
* Until Ver. 1.11, the sequencer operated with timing that models
the TR-808.
1. While holding down the [ptn SELECT] button, turn on the
power.
2. Press pad [7] to switch the operating mode.
ON (lit) The pattern sequencer operates with precise timing.
OFF (unlit) The pattern sequencer operates with timing that models the
TR-808. (Default)

Fixed a problem with TR-REC
We fixed the problem in which it became impossible to set LAST
STEP to “1.”

En résumé :
- il est maintenant possible d'avoir une horloge précise alors qu'avant elle était calquée sur celle de la 808
- le bug du dernier pas impossible à régler sur 1 en TR-REC est résolu.

Et c'est tout pour cette fois. :-D

https://www.roland.com/support/by_product/tr-8/updates_drivers/8787
https://cdn.roland.com/assets/media/pdf/TR-8_v112_e.pdf

[ Dernière édition du message le 24/03/2015 à 23:41:56 ]

Afficher le sujet de la discussion
26
Bonjour à tous!
Est ce quelqu'un peut me faire comme krapod pour mettre le kit 7x7?
Merci d'avance

Julien
27
C'est bon
J'ai trouvé la manip
Merci
28
Lallier59

moi pas.... tu peux aider ?:bravo:
29
Citation de Krapod :
Citation de Chris :
Celà veux dire qu'avant l'horloge était bancale ? J"ai pas vu de problème pour ma part en synchro Midi donc...

Pas bancale, mais légèrement imprécise, pour imiter celle de la 808 (jusqu'à 2 millisecondes d'écart par rapport à la grille). Ici on aura une précision de moins de 0,1ms.


A propos de cette option de timing swingant - comme initialement voulu - ou au contraire droit dans ses bottes apparue avec le firmware 1.12, comme l'info n'est plus visible sous cette forme sur le site http://www.innerclocksystems.com, je remets ça là.

Notons qu'à 120 BPM et 48kHz, l'intervalle exact entre les clics devrait être de 6000 échantillons.

[...] il semblerait que Roland ait volontairement joué sur le timing de la TR-8 pour qu'elle "groove" tout le temps :
http://www.innerclocksystems.com/New%20ICS%20Litmus.html

Citation :
Roland: TR-8 - Factory Default

This Test: Internal Tempo Generator - 120BPM - Audio Output: 16th Rim Shot

Number of samples [48 kHz] between consecutive Sixteenth Events:
5950/ 6050/ 5950/ 6050/ 5951/ 6049/ 5950/ 6050/ 5950/ 6050/ 5950/ 6049/ 5967/ 6033/ 5951/ 6049

Maximum variation between any two consecutive Sixteenth Event intervals:
101 Samples [2.10ms]

NB: Even with Swing set at Centre/Zero the TR-8 has a significant 16th swing - mostly very accurate but pushing and pulling by 50 samples (1.04ms) either way against a straight grid with a slight wobble at the Pattern A/Pattern B transition point.


A comparer à l'originale :
http://www.innerclocksystems.com/New%20ICS%20Litmus.html

Citation :
Roland: TR-808

This Test:- Rim Shot Sixteenths - Internal Sync - Tempo x 2 (120 BPM Approx.)

Number of samples [48 kHz] between consecutive Sixteenth Notes:
5922/ 6019/ 6016/ 6015/ 6016/ 5922/ 6020/ 6014/ 6018/ 5920/ 6019/ 6016/ 6016/ 6013/ 5924/6020

Maximum variance between consecutive Sixteenth Note intervals:
99 Samples [2.06ms]

Litmus Ranking:


https://www.reddit.com/r/synthesizers/comments/2jibow/the_myth_of_the_roland_tr808_groove_a_long_and/

:-D

« What is full of redundancy or formula is predictably boring. What is free of all structure or discipline is randomly boring. In between lies art. » (Wendy Carlos)

[ Dernière édition du message le 26/01/2016 à 11:18:05 ]