Où acheter ST4006C ?
Moins
Meilleur prix neuf
Voir plus d’offres
Fiche technique
- Fabricant : DPA Microphones
- Modèle : ST4006C
- Série : d:dicate
- Catégorie : Kits microphones
- Poids du colis : 1.4 kg
- Autres dénominations : st 4006c, st4006 c, st 4006 c
| Directional pattern | Omnidirectional |
|---|---|
| Principle of operation | Pressure |
| Cartridge type | Pre-polarized condenser |
| Frequency range | 10 Hz - 20 kHz |
| Frequency range, ± 2 dB | 20 Hz - 20 kHz |
| Sensitivity, nominal, ± 2 dB at 250 Hz | 40 mV/Pa; -28 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted | Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A)) |
| Equivalent noise level, ITU-R BS.468-4 | Typ. 27 dB (max. 29 dB) |
| S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) | Typ. 79 dB(A) |
| Total Harmonic Distortion (THD) | < 1 % up to 134 dB SPL peak |
| Dynamic range | Typ. 119 dB |
| Max. SPL, peak before clipping | 140 dB |
| Output impedance | < 200 ohm |
| Minimum load impedance | 2 kohm |
| Cable drive capability | 100 m (328 ft) |
| Output balance principle | Impedance balancing with Active Drive |
| Common Mode Rejection Ratio (CMRR) | > 50 dB |
| Power supply (for full specifications) | 48 V Phantom power (± 4 V) |
| Current consumption | 2.8 mA |
| Connector | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
| Color | Matte black |
| Weight | 63 g (2.2 oz) |
| Microphone diameter | 16 - 19 mm (0.6 - 0.75 in) |
| Capsule diameter | 16 mm (0.6 in) |
| Microphone length | 64 mm (2.5 in) |
| Output voltage, RMS | > 4 V |
| Polarity | +V at pin 2 for positive sound pressure |
| Temperature range | -40 °C to 45 °C (-40 °F to 113 °F) |
| Relative Humidity (RH) | Up to 90% |
| Matching tolerance | ± 0.5 dB |
| Phase deviation for kit | < 5° |
Source : http://www.dpamicrophones.com/en/products.aspx?c=Item&category=123&item=24426
Distribué par Audio 2
»
Autres catégories dans Microphones
Où acheter ST4006C ?
Moins
Meilleur prix neuf
Voir plus d’offres