réactions à la news L'Audiothingies P6 officiellement lancé

En matière d'oscillos les possibilités sont assez étendues ?

The oscillator algorithms

There are 12 different oscillator algorithms available for OSC1 and OSC2:
p6 This is the oscillator from P6 V1 firmware.
When turning the shape parameter, its shape morphs from triangle (shape = 0), to sawtooth (shape = 42), to square (shape = 84) to pulse width.

sin A sinus oscillator that turns into a basic FM operator with the shape control

sin A sinus oscillator that turns into a basic FM operator with the shape control

tri A triangle oscillator into a foldback digital distortion. Shape controls the gain.
When shape is set to 127, the oscillator will produce a triangle wave with its pitch one octave and a fifth higher.

saw The classic sawtooth waveform.Shape adds a second phase shifted sawtooth to the first one.
Shape adds a second phase shifted sawtooth to the first one.When shape is set to 127, the oscillator will produce a sawtooth wave with its pitch of 1 octave higher.
When shape is set to 127, the oscillator will produce a sawtooth wave with its pitch of 1 octave higher.

squ The classic square oscillator with PW.
Shape controls the pulse width.

3sw This oscillator produces 3 detuned saws for that Roland-ish “supers@w” sound, but without the nasty aliasing.
Shape controls the detuning of 3 oscillators

3sq Same as 3sw, but with square oscillators instead.

sws Synchronized sawtooth waveform
This oscillator internally has 2 oscillators, 1 master, and 1 sawtooth slave oscillator that is hard synced to the master.
The shape parameter controls the pitch of the slave oscillator.

sqs Same as sws but with a slave square oscillator.

rz1 rz2 and rz3 PD resonant waveforms
Those are phase distortion algorithms from the Casio CZ series.
They all simulate a filter sweep with the shape parameter.
rz1 is the saw version, rz2 the triangle, and rz3 the trapezoidal one.

Pour le Micro Q j'ai eu une mauvaise expérience