Se connecter
Se connecter
Mot de passe oublié ?
ou
Créer un compte
ou
Se connecter avec Facebook
Notifications
< Retour vers Art Pro VLA II
Agrandir
Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos
Art Pro VLA II
Photos
1/229
Art Pro VLA II

Compresseur de studio de la marque Art

12 avis
Acheter
ACHETER NEUF (9) À partir de 449 €
ACHETER D'OCCASION (2) À partir de 300 €
Présentation du produit Présentation
Avis 12 12
Comparateur de prix 9 9
Petites annonces Annonces 2 2
Forums 11 11

Sujet Différence avec le Pro VLA I

  • 2 réponses
  • 2 participants
  • 1 860 vues
  • 2 followers
1 Différence avec le Pro VLA I
Bonjour,

Quel différence avec le Pro VLA I :???: (à part l'atack et le release réglable ?)

si quelqu'un a pue comparé les deux sa m'intéresse d'en savoir plus niveau son
:D:

bye

--- Greg ---

2
Attack, release, effectivement, mais aussi le vumetre au milieu, et je crois bien aussi qu'ils ont changé les lampes, ce qui, selon les dires de certains forums, n'est pas rien...

ziq : sinkmusic.com | drum samples : waveshaper.org

3
These are the differences between the Pro VLA and the Pro VLA II:

1. Enhanced Link mode
In link mode, CH1 output control acts as a master output level and CH2 becomes a Balance control. This optimizes the Pro VLA II for use as a mastering processor.

2. Active balanced outputs. The old VLA has balanced outputs that have 6dB more gain than when using them in the unbalanced mode. This shows up as an error when using the VU meter to compare the input and output level.

3. LED output meter.
a. Always monitors the output level allowing the user to view Both input and output levels at the same time. b. LED meter indicates both average level plus Peak hold.

4. Attack and Release knobs vs. switches. The Old VLA compressor has switches that allow the user to adjust the attack time between Fast" (~1mSec) and Normal" (~10mSec). The release switch can be set to normal" (200mSec) and Auto" (program dependant, but rather long an average).
a. Attack time as ranges from .25mSec to 50mSec b. Release time ranges from 0.15Sec to 3Sec. (This is program dependant at shorter release rates). c. Improved detector that lowers low frequency distortion at fast release rates.

5. Improved package
a. Rounded front panel machined to countersink all knobs and level meters. b. Re-enforced ears. c. Led lit switch caps. d. Heavier chassis and cover ruggedized for longer life on the road.

6. Lower noise.
a. +4dBu/-10dBv mode switch optimizes the unit for Pro OR consumer operating system levels. b. Toroidal transformer reduces mechanical and electrical hum. c. Tweaked Tube circuit for better dynamic range. d. Increased transformer shielding.

7. Increased ranges on Threshold and Output gain. This allows the user a wider range of operation.
a. Old threshold = -20 to +15, New Threshold range = -30dB to +20dB. b. Old Output gain max = +10dB, New output Gain = +20dB

8. LED lit VU meters. No more dark meters due to blown out bulbs.

9. All of the pots have detents.
a. Imparts a more professional feel. b. Makes settings more repeatable.

ziq : sinkmusic.com | drum samples : waveshaper.org