Se connecter
Se connecter

ou
Créer un compte

ou

Acheter neuf Royer Labs R-122 mkII

  • Audiosolutions En stock / NC 2 249,00 €
  • Thomann En stock / Livré en 48h 2 269,00 €
  • SonoVente Pas de stock / NC 2 269,00 €
  • Woodbrass Pas de stock / NC 2 269,00 €
  • Univers Sons Pas de stock / NC 2 269,00 €

Annonces R-122 mkII

Alerte nouvelle annonce

News

Images

Fiche technique

  • Fabricant : Royer Labs
  • Modèle : R-122 mkII
  • Catégorie : Microphones à ruban
  • Fiche créée le : 12/05/2015

2nd generation of the Royer R-122 phantom powered, active ribbon microphone first launched in 2002, with added switchable -15 dB pad and a switchable bass-cut filter, located on the back of the microphone and recessed to prevent accidental activation.

  • Phantom powered circuitry provides high output and impedance matching
  • -15 dB pad before the mic’s electronics gives more headroom when activated. 
  • Bass cut filter reduces proximity effect and bass below 100 Hz when activated
  • High SPL Capabilities
  • No distortion up to maximum SPL rating
  • Extremely low residual noise
  • Ribbon element is not affected by heat or humidity
  • Absence of high frequency phase distortion
  • Equal sensitivity from front or back of element
  • Consistent frequency response regardless of distance
  • Rear side of mic records slightly brighter when three feet or closer to sound source
  • Acoustic Operating Principle: Electrodynamic pressure gradient with active
    electronics.
  • Polar Pattern: Figure-8
  • Generating Element: 2.5-micron aluminum ribbon
  • Magnets: Rare Earth Neodymium
  • Frequency Response: 30 - 15,000 Hz ±3 dB
  • Sensitivity: -36 dB (re. 1v/pa ±1 dB)
  • Switchable Pad: -15 dB
  • Switchable Bass Cut: 100 Hz (6 dB per octave)
  • Self-Noise: < 18 dB
  • Output Impedance: 200 Ohms, balanced
  • Output Connector: Male XLR 3-pin (Pin 2 Hot)
  • Rated Load Impedance: 1K-Ohm minimum
  • Maximum SPL: 135 dB @ 30 Hz
  • Power Requirements: 48-Volt Phantom Only
  • Supply Current: 4 mA
  • Dimensions: 206mm L X 25mm W (8 1/8” L X 1” W)
  • Weight: 309 grams (10.9 oz)
  • Finish: Burnished Satin Nickel / Matte Black
    Chrome (optional)
  • Accessories: Protective wood case, mic sock 
    Optional Accessories: Wind screen, shock mount
  • Microphone Warranty: Lifetime to original owner (repair or replace
    at Royer’s option)
  • Ribbon Element Warranty: One Year
»

Autres catégories dans Microphones

Autres dénominations : r 122 mk ii, r122mkii, r122 mkii, r 122mkii, r 122 mk ii, r 122 mk 2, r 122 mk2, r122mk ii, r122mk2, r122 mk ii, r122 mk2, r 122mk ii, r 122mk2