Ladik M-330 Clock To MIDI Sync

M-330 Clock to MIDI synchronizer.

Allows sync MIDI devices from Eurorack clock.

Clock in jack (24 clock ticks means 1 quarter note in slaved MIDI device)
Start, Continue and Stop input jacks
Divided clock output jack for driving eurorack modules + button + LED.

There are two main modes of operation (selectable by long button press):

-in first mode are clocks sent to MIDI independently of current „running state“ (MIDI clocks and divided clock out are active everytime). Starting slaved MIDI devices requires start (or cont) trig.

-in second mode are clocks sent to MIDI only if current „running state“ is running (MIDI clocks and divided clock out are active only after „Start“ or „Continue“ – system is running, MIDI clocks and divided clocks are not sent after „Stop“ – stopped system)

Divided clock output can be set to „without triplets“ or „with triplets“ mode (selectable by holding button at power-up):
without triplets contains 1/4 note, 1/8 note, 1/16 note, 1/32 note or as raw clock input (nondivided)
with triplets contains 1/4 note, 1/8 note, 1/8 triplets, 1/16 note, 1/16 triplets, 1/32 note, 1/32 triplets or as raw clock input (nondivided)

Current clock division ratio is selectable by short button press cyclically (with or without triplets).

Width: 6TE/ 6HP/ 30mm.
Depth: 45mm /1,8″ max.
Current: 20mA max. from +12V only (no need for 5V rail)
Power cable included.

.

http://ladik.ladik.eu/?page_id=861