Prix public US : $899 incl. VAT 
                            
        Où acheter ECM-519 ?
        
                            
                    
                        
                
                            
        
    
Moins
                    
                
        Il n’y a pas de petite annonce pour ce produit.
                Fiche technique
- Fabricant : Empress Effects
- Modèle : ECM-519
- Catégorie : Compresseurs de studio
- Autres dénominations : ecm 519, ecm519
Compresseur à FET au format 500
- All Analog Signal Path
- Selectable Output Transformer - Use the active balanced output for a pristine signal path or engage the output transformer for some added warmth. Load down the output transformer for even more sold school analog character and some pleasant saturation.
- 3 Ratios - 3:1 gives great transparent compression for evening out dynamics. 6:1 give great control and can be pretty aggressive when doing lots of gain reduction. 12:1 is approaching limiting and can be very useful when you need to sit something in the mix or hit it hard for tons of character.
- Super Fast Attack Speeds - Dial in attack speeds down to 50 microseconds! Great for controlling transients and the beauty of FET based compressors.
- Mix Knob for Parallel Compression - Blend in dry signal for New York style compression.
- 10 segment LED Gain Reduction Meter - The very resoponsive meeter let you know what the compressor is doing.
- Sidechain HPF - High pass the sidechain at 120 Hz or 220 Hz so the compressor doesn't react to the really low frequencies.
- Auto Modes - These 2 modes employ completely separate sidechains. They both have 2 detectors that work together; one with really fast time constants at a higher threshold that reacts primarily to peaks, and a slower detector, with a lower threshold to smooth the overall signal. This allows the auto modes to provide extremely transparent compression that isn't possible with traditional attack and release controls.
- Stereo Link - connect 2 units and link them as a stereo pair using either the link pin on your rack or the supplied link cable.
- Analog Warmth - Engage the transformer and set the mix for 100% dry to use the ECM-519 for adding warmth without using the gain reduction circuit.
- True Bypass - The Empress ECM-519 employs true bypass, so you can be sure that it's not affecting the signal when disengaged.
| Input Impedance | 48 kOhm | 
| Output Impedance | 50 Ohm (600 Ohm with transformer) | 
| Frequency Response (-3dB) | 10Hz - 35kHz | 
| Power Consumption | 120mA per rail | 
| Height | 5.25" | 
| Width | 1.5" | 
| Form Factor | API 500 Series 1U module | 
| Outpul Level | up to +22dBu | 
| Input Level | up to +22dBu | 
| Attack Range (manual mode) | 50us - 50ms | 
| Release Range (manual mode) | 50ms - 1s | 
Distribué par Filling Distribution
»
News
Vidéos
Manuels et autres fichiers
Autres catégories dans Processeurs de dynamique
        Où acheter ECM-519 ?
        
                            
                    
                        
                
                            
        
    
Moins
                    
                
        Il n’y a pas de petite annonce pour ce produit.
                 
                            
 
                








 
                                         
                                         
                                         
                                         
                                         
                                         
                                         
                                         
                                                                             
                                         
                                     
                                        
                                     
                                     
                                     
                                    