Caracteristiques de cette interface

Peut on convertir l'aes en spdif ??? (je crois que oui mais certain à 100%)

The electrical characteristics of AES/EBU are based on on RS-422, so basically any differential RS-422 chip will do as the receiver and transmitter chips. S/PDIF coaxial interface is not specificaly based on any other standard I know of (but is quite similar in signal levels and bandwidth requrements to some video signals).
Both S/PDIF and AES/EBU can, and do transfer 24 bit words. In AES/EBU, the last 4 bits have a defined usage, so if anyone puts audio in there, it has to go to something that doesn't expect the standard specifies. But in S/PDIF, there's nothing that says what you have to use the bits for, so filling them all up with audio is acceptable. Typical S/PDIF equipments only use 16 or 20 bit resolutions. While many equipments use more than 16 bits in internal processing, it's not unusual for the output to be limited to 16 bits. Read more at: http://www.epanorama.net/documents/audio/spdif.html