SolidGoldFX Electroman MKII

• Fabricant : SolidGoldFX
• Modèle : Electroman MKII
• Catégorie : Delays / échos pour guitare
• Fiche créée le : 17/03/2019

Tone is always the goal, so if you want an outstanding delay unit that hacks through the vines of tiered menus and other complicated fluff, let the Electroman MKII be your machete.

KNOBS:

Level:

Changes the amount of wet signal from nothing at all to highly involved.

Repeat:

At zero, you'll find the humblest of all delays: the slapback. At full-blast, the repeats will run away and overtake your signal.

Color:

This control takes a little treble off the top as you turn it. Fully left is bare-naked digital, and turning it up increases the murk.

Flutter:

Controls the modulation depth. Keeping this control at zero shuts the circuit off.

Time:

Changes the delay time from a double tracking-esque 70 milliseconds to a full lengthy second.

TOGGLE SWITCHES:

Warp (toggle):

Changes the intensity of the Warp footswitch across three modes, from subtle (center) assertive (left) to imminent lift-off (right).

Mode:

Changes between standard delay (left) and a special second mode(right), which sends the repeats slamming into the second delay line at half time.

Speed:

Offers three different speed settings of the modulation circuit - slow in the center position, fast when toggled right and medium in the left position. See also: flutter knob.

Tails:

The Electroman MKII is buffered bypass, and this switch lets you decide how you want the repeats to behave with the pedal switched off: choked off when switched left, or trailing when switched right.

AUXILIARY

FX Loop Jack:

This jack lets you attach a stereo Y-cable, allowing you to patch in any number of effects. These effects let you apply external effects only to the repeats, for endless amounts of fun. You can even run a full external pedalboard in this loop. We won't tell. In addition, the loop also doubles an an expression input to control the level knob.

Input:

Instrument or other pedal goes here.

Output:

Amplifier or other pedal goes here.

Warp Footswitch:

Engaged self-oscillation when and where you want it, and relents when you release it.

True Bypass/Trails Footswitch:

Turns effect on and off.

POWER:

The Electroman II requires a center-negative 9VDC power adapter with at least 40mA of current (not included). Almost all power supplies meet this requirement, but check yours first.

DIMENSIONS

4.67" x 3.68" x 1.18" (119mm x 94mm x 30mm)

Distribué par Filling Distribution