Yorkville E10P

Specifications
System Type Powered Loudspeaker
Active or Passive Active
Program Power (Watts) 325 Watts (650 Watts Peak)
Max SPL (dB) 129dB Peak (123dB Continuous)
Frequency Response (Hz +/- 3dB) 65 - 20k
Crossover Frequency (Hz) 1500
Driver Configuration 10-inch / 1-inch
HF Dispersion (°H x °V) 100 x 25
HF Protection Peak and Average Limiting
LF Protection Excursion, RMS
Cooling Scheme Convection
Power Cable Removable IEC
Power Switch Yes
Power Consumption (typ/max) 120VA / 200VA
Inputs 1 Combijack (XLR / 1/4-inch)
Input Impedance (Bal/UnBal) 4k ohms / 2k ohms
Input Sensitivity (Vrms Sine) Line in 1.4 at center, 0.35 at max
Level Controls Gain
EQ Controls Bass, Treble
Limiter Peak and Average limiting on horn and woofer
LED Indicators Power, Clip
Corners Metal
Feet Plastic Glides
Flying Hardware 5 (2 Top, 2 Bottom, 1 Pullback)
Bar Handles One Side
Pole Mount Adapter (1 3/8"-3.5cm) Yes
Enclosure Materials 15mm (5/8-inch) 11-ply Russian Birch
Port(s) Rear
Grille Perforated Metal
Covering / Finish Black Ozite (Carpet)
Optional Covering / Finishes Black Ultrathane Paint (E10PB)
Dimensions (DWH xbackW COM inches) 12 x 13 x 18.5 x 5.5
Dimensions (DWH xbackW COM cm) 30 x 33 x 45 x 14
Weight (lbs/kg) 34 / 15.5