Annonces RS-601
Alerte nouvelle annonceImages
Fiche technique
- Fabricant : Clear-Com
- Modèle : RS-601
- Catégorie : Micro-casques
- Fiche créée le : 16/01/2018
SPECIFICATIONS
0 dBv is referenced to 0.775 V RMS
General
Amplifier Design:I.C. amplifiers, including solid-state digital switching and signaling circuits. Current-limited and short-circuit protected. Signal to Noise:>75 dBBridging Impedance:>15k Line Level:-14 dB, +5 dB max.Sidetone Adjust:>35 dBEMI and RFI rejection:>60 dB
Microphone Pre-Amplifier
Headset Mic Impedance:200 ohmsGain, mic to line:41 dB (dynamic)Limiter Range:26 dB Frequency Response: 200 Hz – 12 kHz contoured for intelligibility
32 RS-601 BELTPACK
Headphone Amplifier
Load Impedance:50 - 2,000 ohmsOutput Level:+17 dBv before clipping Distortion:<0.1% THD @ 1 kHzGain, line to output:+34 dBFrequency Response:100 Hz - 18 kHz, ±2dB
Connectors
Intercom Line:(2) 3-pin XLR–M–FHeadset:4-pin XLR–M
Power Requirements
RS-60126mA quiescent30mA average talk 50mA talk with signaling DC Voltage Range:12-32 volts
Environmental
Operating Temp. Range: 0°C - 70°C (32°F - 158° F)Humidity: 0 - 90% relative humidity
RS-601 BELTPACK 33
Dimensions
4.58"H x 3.73"W x 1.34"D (116 x 95 x 34 mm)
Weight
7.3 oz. (0.20 kg)
Distribué par audiopole
Manuels et autres fichiers
Autres catégories dans Casques audio
Autres dénominations : rs601