Annonces Side-Only
Alerte nouvelle annonceForums Bereich03 Audio Side-Only
News
Fiche technique
- Fabricant : Bereich03 Audio
- Modèle : Side-Only
- Catégorie : Autres processeurs d'effets
- Fiche créée le : 17/03/2015
double-width analogue 500-series module designed to process the side information from any stereo signal
three distinct sections: a gain stage, a low-cut filter and an EQ.
The gain stage has +/-5dB available in 1dB steps. By adding or subtracting gain to the side signal, the stereo image can be increased or decreased, helpfully providing control over the mid/side balance of a mix.
The low-cut filter is a 12dB/oct filter with six cutoff frequencies between 40Hz and 320Hz. It allows for the removal of unwanted low end from the sides of a stereo signal. This can be especially useful for correcting of out-of-phase bass in mixes before vinyl cutting or to tighten up stereo guitars/drums/synth busses/tracks during mixing.
The EQ is a broad Baxandall equaliser with six different frequencies covering a wide range of frequencies from 14kHz down to 330Hz. The gain for the EQ can be adjusted +/-10dB in 2dB steps, allowing the stereo part of a specific frequency range to be boosted or cut as desired.
Finally, the solo function enables you to monitor either the ‘side' or ‘mid’ portion of the signal so you can hear what you are processing. It can also be used to create a mono signal from a stereo source.
Autres catégories dans Processeurs d'effets
Autres dénominations : sideonly