Se connecter
Se connecter

ou
Créer un compte

ou
Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos
Ebtech Hum Eliminator
Photos
1/24

Tous les avis sur Ebtech Hum Eliminator

Insatisfait(e) des avis ci-contre ?
Filtres
4.7/5
(3 avis)
67 %
(2 avis)
33 %
(1 avis)
Donner un avis
Avis des utilisateurs
  • Anonyme

    propre et pratique

    Ebtech Hum EliminatorPublié le 14/05/14 à 11:13
    Permettant de palier aux ground loops et autres parasites, ce rack est pratique afin de traiter un nombre confortable de sources.


    - Il s'agit d'un rack à 8 entrées en jack.
    - Les entrées sont détectées et transformées (TR->TRS ou TRS->TR).
    - L'unité est passive et rackable.
    - Produit commandé aux usa car les importateurs se gavent trop..
  • wwhhhaattwwhhhaatt

    excellent outil

    Ebtech Hum EliminatorPublié le 22/06/11 à 21:28
    contenu en anglais (contenu en anglais)
    The ebtech hum eliminator has two sets of 1/4" inputs and outputs that safely lift a ground from your signal.There is also a rack mount version which has 8 channels of the same. It does not require any power or special adapters which makes it an easy tool to grab and use. I sometimes runs two amps in stereo with an a/b box and run into ground loop problems which make my amps hum. Ground loops are an electrical problem that can introduce hum and interference into your signal when your equipment is connected to multiple ground sources . When this happens I just stick this little box between my pedal board output and the input of one of them amps. Voila noise gone. I have seen people do odd things like cut the ground off their amp plug or use butchered three prong adapters to avoid a ground loop. This is incredibly stupid and dangerous especially when a box like this exists. The ground on your equipment is what keeps you from getting electrocuted and should not be played with unless you know exactly what you are doing. I don't and that is why I bought this.

    The only downside to this box is it seems to cut a little bit of high end from your signal .I'm guessing that since it is a passive device it loads your signal down a bit and robs you of some of the power. For me this is not a problem because I put it before the amp that is lower in volume and I can always just turn the treble up to compensate. Turning the treble up is not perfect but it is better than getting a loud buzz from your amp or altering your ground connection and getting shocked.
  • jacobjackattackjacobjackattack

    Ebtech Hum EliminatorPublié le 19/04/09 à 13:51
    Je l'utilise depuis un an maintenant

    C'est simple (on branche) ça filtre et ça retire le gros buzz de masse immédiatement, pas besoin de l'alimenter

    Filtre complètement transparent: aucune altération du son