Annonces TX6118-P
Alerte nouvelle annonceImages
Fiche technique
- Fabricant : Park Audio
- Modèle : TX6118-P
- Catégorie : Subwoofers amplifiés
- Fiche créée le : 29/07/2016
Le TX6118-P est un subwoofer actif sono.
Features
- Maximum SPL 133 дБ
- Frequency range 38 – 100 Hz
- 18”, 1200W woofer (B&C SPEAKERS) with 4″ voice coil
- Acoustic design – rectangular cabinet, bass reflex
- Cabinet material – birch plywood 18 mm
- Black water-polymer finish
- Protective steel grid with powder coating
- Transpanent foam, glued to the inner surface of the grid
- Built-in D class amplifier (2000 W RMS), switching power supply with PFC
- DSP engine, acting as crossovers, EQ, time alignment, limiting and speakers overload protection
- Two line inputs and outputs – 2 х XLR
- Line output switch: THRU/SAT (THRU – parallel connection to input, SAT – send processed signal to line output)
- Input level control
- Polarity switch (Norm/Rev)
- Delay switch ( 0, 1, 2 meters )
- Preset switch (1 factory and 2 users)
- USB connections for DSP setting (software – Sigma studio from Analog device)
Specs
| Speaker system | |
| Nominal Power Handling | 1200 W |
| Сontinuous Power Handling | 2400 W |
| Frequency Range | 38 Hz - 100 Hz |
| Maximum Output SPL (half space) | 133 dB/1m* |
| Weight | 41 kg |
| Dimensions: (W х H х D) | 570 x 542 x 677 mm |
| Built-in Amplifier with DSP engine | |
| Power Rating (RMS) | 2000 W, class D |
| Sensitivity | 775 mV |
| Input Impedance | 10 kOhms |
| Signal-to-Noise Ratio | 98 dB (unweighted) |
| Input / Line Output | 2 х XLR / 2 х XLR |
| Cooling System | forced ** |
| Power Requirements | ~160-280 V, 50/60 Hz |
| DSP engine | |
| Sampling Rate | 48 kHz |
| DAC/ADC | 24-bit |
| Internal Processing | 56-bit |
Source : http://parkaudio.ua/en/speakers/subwoofers/tx6118-p/
»
Autres catégories dans Enceintes de sonorisation
Autres dénominations : tx6118p, tx 6118 p