S-CAT Analogue Dub-Siren XS

SPECIFICATIONS

1. Trigger
Use the big red illuminated momentary button or hit the lock-down toggle to maintain the sound. 

Whatever method is used to trigger the sound, the red button will illuminate for the same duration as the sound and fade in or out. 

Please note there is also an external trigger input!

2. Oscillator Pitch
Set or sweep the pitch using this dial. Range is around 6 octaves, 

so both very high and extremely low, sub-sonic frequencies are accessible.

3. Attack

Set slow or fast attack on the oscillator manual trigger button using this toggle switch.

4. Osc. Decay/Release
Set the length of decay/release, from a short blip suitable for clave-type sounds, to a long decay of around 30 seconds.

5. Osc. Pitch Sweep
Otherwise known as envelope release. Increase the sweep amount and, when a sound is triggered, it will "sweep" down in pitch.

6. Osc. Waveform

The "Dub-Synth" has a wealth of complex waveforms that can be accessed via this dial. 

At the left, a sine with a slight edge. At the right, a sine/saw hybrid waveform.

7. LFO Rate

The dial controls rate. An LED indicates speed. 

8. LFO Waveform
Choose square or triangle LFO waveform.

9. LFO depth
At minimum, the LFO is flat. Increase depth using this dial.

11. Oscillator Volume
Controls the volume of the oscillator. The output level is fairly powerful from this machine. 

12. Mix Volume

Controls the volume of the mix input. Very useful if an external mixer is not available.

1/4" Mono Audio Output jack socket 

1/4" Mono Mix Input jack socket 

1/4" External Trigger jack socket

Triggers from many other synths or drum machines. Eg. Roland TR-606, etc.

24v. PSU Socket

Supplied with 24v. DC PSU. 

Can be used in any country, perfect for the traveling musician

Please do not use any other!

Weight : 1.8 kg

Dimensions : 24cm x 20cm x 15