Sujet Test rightmark audio du Balladeur Muvo V200
- 0 réponse
- 1 participant
- 455 vues
- 1 follower
blokosss
18
Nouvel·le AFfilié·e
Membre depuis 19 ans
Voici mon test rmaa55 de ce bon ptit balladeur. Ma méthode de test est la suivante (désolé pour l'anglais) :
1/ generate calibration and test signal .wav files with rmaa
2/ transfert .wav files in mp3 player by the usb connection
3/ at this stage I had to move my wav files in the VOICE folder, if not the player won't play them, and rename respectively to VOC001.WAV and VOC002.WAV
4/ unplug from usb and connect player's analog output to sound card's analog input (my sound card is a terratec phase 28, I also tested it : phase 28 rmaa test
5/ launch rmaa55, launch wizard, choose recording only (third from the top), recording device is your sound card and formats 44khz 16bits
6/ here you have to play the calibration test file (VOC001.WAV) with your player , as you would play a recorded sound with the muvo's internal microphone. Adjust the levels with the player and sound card's volumes.
7/ if the calibration test is ok, start the signal test, press ok and then play the test signal (VOC002.WAV) to the end.
8/ choose a slot and generate a html report.
1/ generate calibration and test signal .wav files with rmaa
2/ transfert .wav files in mp3 player by the usb connection
3/ at this stage I had to move my wav files in the VOICE folder, if not the player won't play them, and rename respectively to VOC001.WAV and VOC002.WAV
4/ unplug from usb and connect player's analog output to sound card's analog input (my sound card is a terratec phase 28, I also tested it : phase 28 rmaa test
5/ launch rmaa55, launch wizard, choose recording only (third from the top), recording device is your sound card and formats 44khz 16bits
6/ here you have to play the calibration test file (VOC001.WAV) with your player , as you would play a recorded sound with the muvo's internal microphone. Adjust the levels with the player and sound card's volumes.
7/ if the calibration test is ok, start the signal test, press ok and then play the test signal (VOC002.WAV) to the end.
8/ choose a slot and generate a html report.
- < Liste des sujets
- Charte