Annonces Sub 10
Alerte nouvelle annonceImages
Fiche technique
- Fabricant : Aps - Audio Pro Solutions
- Modèle : Sub 10
- Catégorie : Caissons de basses pour le monitoring
- Fiche créée le : 09/04/2014
Subwoofer
Calibrated Controls
Type | Active – Class D power amplifier Hypex: 400 W @ 4Ω |
Dimensions | Height x Width x Depth 39 cm x 39 cm x 40 cm / 15.35" x 15.35" x 15.75" |
Free Field Frequency Response | ±2.5 dB: 19-90 Hz |
SPL in Free Field @ 1m | RMS: 108 dB (single subwoofer) Peak: 116 dB (pair of subwoofers) |
Weight | 24 kg / 53 lbs |
Input Sensitivity Switch / VOLUME (8 positions) | -4.5dB, -3dB, -1.5dB, 0dB, 1.5dB, 3dB, 4.5dB, 6dB |
Input Sensitivity Switch / VOLUME (3 positions) | -20dB, -10dB, 0dB |
Low-pass filter Switch CUT OFF | 40Hz, 45Hz, 50Hz, 57Hz, 63Hz, 71Hz, 80Hz, 90Hz |
Filters By-Pass Switch UNFILTERED (LFE) | Position down: filters ON Position up: filters OFF |
PHASE Switch | 0 degrees, 180 degrees |
STAND-BY Switch | Position down: active STAND-BY Position up: continuous mode (Stand-by OFF) |
Loudspeaker
Amplifiers
Inputs, Outputs
Protections
Signaling Devices
Subbass Loudspeaker | Ø 29 cm Diaphragm: cellulose, surround: rubber |
Subbass Loudspeaker Power Amplifier | 400 W RMS @ 4 Ω (270 W RMS @ 6 Ω) |
THD distortions | Typ 0.01%, Max 0.05% 20HzMax 0.04% 20Hz |
INPUT right (R) and left (L) | Two types (common socket Combo): - XLR symmetrical (balanced) - TRS symmetrical (balanced) "6.3 mm" and RCA nonsymmetrical Input impedance 10 kΩ |
„Loop Through” Output | XLR symmetrical, Output impedance 100 Ω |
Subbass Loudspeaker Protection | Pop-free start and stop control |
Power Amplifiers Protections | Overcurrent protection |
Power Amplifiers Protections | Overvoltage protection |
STAND-BY ON | Orange LED |
CLIPPING detected | Red LED |
POWER ON / DC-error detected | Green LED / Red LED |
Distribué par Funky Junk France
»
Autres catégories dans Enceintes de monitoring
Autres dénominations : sub10