Tannoy PS 110-B

Écrire un avis ou Demander un avis

Présentation du produit Présentation

Avis

Comparateur de prix

Petites annonces

Forums

Annonces PS 110-B

Alerte nouvelle annonce

Loudspeaker Section

Frequency Response: -3 dB 31 Hz -150 Hz (-10 dB @ 21 Hz)
Bass unit diameter: 10" - 254 mm
Low Frequency cutoff: -3 dB @ 31 Hz, 6th order tuning
vented box (36 dB / Octave below 31 Hz)
Maximum SPL: 110 dB peak SPL @ 1 meter at limiter threshold
System dimensions:
- H 17.5"- 445 mm x
- W 11 5/16" - 287 mm
- D x 16.5" - 419 mm
System weight: 33 Lbs -14.5 Kg

Amplifier Section

Input Connectors:
- PS110B: L/R XLR balanced inputs, 10 kOhm
- PS110: L/R RCA, speaker level option
Input Level: Continuously variable input gain control
Low Pass Filter: Continuously variable 40 Hz - 150 Hz,24 dB/Octave
All Pass: 31 Hz - 300 Hz +3 dB
High Pass Filter: Fixed at 80 Hz, 12 dB / Octave
High Pass output:
- PS110B: L/R, unity gain XLR balanced
- PS110: L/R RCA, speaker level option
High Pass output Bandwidth: 80 Hz - 150 kHz -3 dB
Amplifier type: Mosfet outputs
Power rating: 110 Watts RMS
Protection: Limiter threshold at onset of clipping
Power indicator: Front mounted green LED in active mode, "when signal is present or on initial power up". Green LED turns to red if signal is not present for more than two minutes indicating stand-by mode. The sub turns "auto on" when signal is re-introduced.
AC Power Requirement: 110/120 VAC 50/60 Hz or 220/240 VAC 50/60 Hz
Power Consumption: 16 Watts at idle, 150 Watts at rated power

Autres dénominations : ps110b, ps110 b, ps 110b, ps110 b, ps 110b