Voir les autres avis sur ce produit :
loudfunk « Perfect travel interface... »
Publié le 24/03/11 à 20:05
(contenu en anglais)
2 inputs and 2 outputs, big volume knob selectable for input 1/input 2/output from software/output from hardware/selectable midi function.
Level LEDs switchable for input and or output.
UTILIZATION
Use it on my Mac Book pro as my interface when I travel. And more importantly to interface rental amps with efx via Apple Main Stage 2. More on that below...
As a recording interface I use it on Logic 9, or Pro Tools 9. And when dual booting the laptop into windows to use Samplitude/Sequoia via Parallels Desktop.
It's limited to record two tracks at a time, but for recording guitar on the go it's great. The inputs are switchable between instrument/line level and/or mic inputs. Works well for dynamic mics like the Shure SM57 or the Sennheiser 609, etc...
Downside is that it doesn't have phantom power for condenser mics which require it.
GETTING STARTED
The set-up is a breeze install the drivers and Apogess Maestro control panel that lets you select levels, inputs, routing, whether audio will be send straight to the hardware outs or from the recording software.
And you're ready to record.
Since this is OSX only the only way to use it on a windows program is by using it through Parallels Desktop or VM Fusionware and run Windows on top of OSX with the Apogee running as default audio under WMD drivers.
OVERALL OPINION
The best part of this interface is using it with Apple Maisnstage, Apple's stand alone software-instrument/amp-sim/AU plug-ins rack.
You run your guitar into the front of your amp, run the efx send into input 1 on the Apogee, and output 1 back to your amp's efx return.
Then open Main Stage and select the Apogee Duet as the interface, choose input 1 as your in, and out 1 as your output (switch to mono).
And then you can add whatever plug-ins you like...delays, filters, reverb, etc...
The latency is pretty good in a serial loop and of no concern in a parallel loop. The best part is that the computer pretty much pulls all resources into running Main Stage at a higher priority than anything else so it's just about as solid as a hardware processor. Downside is that in order to switch stuff on or off you still will have to carry a midi controller. But hey it beats paying cargo for a fridge sized rack.
Level LEDs switchable for input and or output.
UTILIZATION
Use it on my Mac Book pro as my interface when I travel. And more importantly to interface rental amps with efx via Apple Main Stage 2. More on that below...
As a recording interface I use it on Logic 9, or Pro Tools 9. And when dual booting the laptop into windows to use Samplitude/Sequoia via Parallels Desktop.
It's limited to record two tracks at a time, but for recording guitar on the go it's great. The inputs are switchable between instrument/line level and/or mic inputs. Works well for dynamic mics like the Shure SM57 or the Sennheiser 609, etc...
Downside is that it doesn't have phantom power for condenser mics which require it.
GETTING STARTED
The set-up is a breeze install the drivers and Apogess Maestro control panel that lets you select levels, inputs, routing, whether audio will be send straight to the hardware outs or from the recording software.
And you're ready to record.
Since this is OSX only the only way to use it on a windows program is by using it through Parallels Desktop or VM Fusionware and run Windows on top of OSX with the Apogee running as default audio under WMD drivers.
OVERALL OPINION
The best part of this interface is using it with Apple Maisnstage, Apple's stand alone software-instrument/amp-sim/AU plug-ins rack.
You run your guitar into the front of your amp, run the efx send into input 1 on the Apogee, and output 1 back to your amp's efx return.
Then open Main Stage and select the Apogee Duet as the interface, choose input 1 as your in, and out 1 as your output (switch to mono).
And then you can add whatever plug-ins you like...delays, filters, reverb, etc...
The latency is pretty good in a serial loop and of no concern in a parallel loop. The best part is that the computer pretty much pulls all resources into running Main Stage at a higher priority than anything else so it's just about as solid as a hardware processor. Downside is that in order to switch stuff on or off you still will have to carry a midi controller. But hey it beats paying cargo for a fridge sized rack.