réactions à la news Encore une grosse mise à jour pour le Super Disting EX Plus

• Added the Convolver algorithm.
• Added the single mode 'display zoom' feature.
• Added filter and external effects loop options to the Augustus Loop algorithm.
• The Poly Exciter algorithm now also has the new input and arpgeggiator modes that were added in version 1.12 to the SD Multisample and Poly Wavetable algorithms.
• The Poly Wavetable algorithm now has the option of using inputs as 'pressure' instead of 'gate' (essentially replacing the volume envelope with a VCA input).
• MIDI mappings now support aftertouch messages.
• The SD Multisample algorithm now supports the '-endLoopOnRelease' playlist flag.
• Algorithms that support Scala and MTS now support loading MTS dumps from the MicroSD card.
• Scala .scl and .kbm tunings can now be sent to the module over MIDI, allowing live iteration.
• Added a menu item to save the most recent MTS tuning dump received over MIDI to the MicroSD card.
• All SysEx communication now uses a SysEx ID, so multiple modules can be individually addressed.
• Added the 'Show SysEx parameter' setting.
• The accessibility support has been further developed.
• If multiple preset changes are received over MIDI while the module is busy (e.g. loading a wavetable) it no longer performs each preset change individually, instead jumping directly to the last one.
• Fixed a crash in the mappings menu when scrolling around between parameter 1 and the highest parameter.

2021

• The SD Multisample and Poly Wavetable algorithms have the following enhancements:
o Added more options for the 'Input mode' parameter, allowing multiple CV inputs per gate (for use with, for example, modules that output chords of CVs).
o Chord generation and arpeggiation are now independent. If multiple pitch CVs are provided per gate, the arpeggiator can use these pitches (instead of or as well as the generated chord).
o Added a new 'As Played' arpeggiator mode.
o There is now an option for the paraphonic gate ouptut to reflect whether there are any keys/gates held, rather than whether there are any voices playing.
• The SD Multisample algorithm has the following enhancements:
o The 'Env Time' parameter has been replaced by a full ADSR envelope, and the release fades are much smoother.
o The algorithm now has a built-in delay/echo effect.
o The algorithm now has a hi-fi style overall tone control.
o Added the 'Output spread' parameter.
o The 'Normalisation' parameter has been removed. Instead, the 'Gain' parameter has a much wider range.
• Added the 'First MIDI note' option to the SD 6 Triggers algorithm.
• Added the 'Trigger no retrigger' trigger mode option to the Quad Envelope algorithm.
• Added the 'LFO shape' parameter to the Granulator algorithm.
• Added MIDI SysEx messages to replicate the I2C interface to the Looper algorithm.
• Added some accessibility support (aimed at using a screen reader with an associated HTML tool) via MIDI SysEx.
• Autosave and manually saving a preset no longer interrupt audio.
• Incorporated disting mk4 firmware version 4.21 (and so adding the Low Pass Gate and Attenuverter/Offset algorithms).
• Delay time can now be set as a MIDI clock division in the Poly Wavetable, Poly Exciter, Granulator, and Multi FX algorithms.
• Added note range parameters to the SD Multisample algorithm.
• Added routing options to the WAV Recorder algorithm so all inputs can be monitored when recording more than two audio channels.
• Added mix coefficient smoothing to the Matrix Mixer algorithm.
• Added end-of-cycle triggers and activate/inactive gate outputs to the Quad Envelope algorithm.
• Extended the MIDI mapping system to dual mode algorithms.
• Fixed a problem in the SD 6 Triggers algorithm where looping samples would not be correctly initialised to those set by the parameters until retriggered.
• Fixed a problem that would cause the Looper algorithm to immediately enter record when loaded as a startup preset.
• Fixed a problem where the Audio Playback with Crossfade algorithm would trigger a playback cycle when the folder was changed even if the gate mode was 0 and the gate CV was low.
• Fixed an issue where loading a Poly Wavetable preset that used wavetable 0 would not load the wavetable.
• The SD 6 Triggers algorithm now allows specification of a different sample folder for each voice.
• Added the ability to disable trigger inputs in the SD 6 Triggers algorithm (while leaving the voice active for MIDI/I2C triggering).
• The streaming of samples from the SD card by the SD Multisample and SD 6 Trigger algorithms has been improved to cope better with under-performing SD cards.
• MIDI bank select messages are now supported for preset change by MIDI program change messages.
• Fixed the behaviour of the 'Offset' parameter in the Dual Sample and Hold algorithm when using Z as the signal input.
• Fixed the displayed millisecond value of sample offsets in the SD 6 Trigger algorithm.
• Fixed an issue with voice allocation in the Poly Wavetable algorithm which could cause dropped notes when playing chords with slow attacks.
• Fixed the behaviour of the MIDI/CV algorithm's 'Interrupt' feature when used with low or high note priority mode.
• Fixed a problem in the Dream Machine algorithm where setting the numerator and denominator parameters via I2C would produce unpredictable results.
• Added the Poly Exciter algorithm.
• Added the Quad Envelope algorithm.
• Incorporated disting mk4 firmware version 4.20.
• In the SD 6 Triggers algorithm, pressing 'R' while choosing a sample now triggers playback of that sample.
• Added new stereo+mono output assignments to the SD 6 Triggers algorithm.
• Added new arpeggiator patterns to the SD Multisample and Poly Wavetable algorithms.
• Added the ability to enable Chord mode on a per gate basis to the SD Multisample and Poly Wavetable algorithms.
• Added support for specifying the sample folder on a per gate basis to the SD Multisample algorithm.
• Added the 'Pitch quantize' parameter to the Granulator algorithm.
• Added MTS (MIDI Tuning Standard) support to the MIDI/CV and Programmable Quantizer algorithms.
• Added I2C support for dual mode operations (parameters, algorithms, presets, etc.).
• Optimised the case where both sides are running Audio Playback algorithms, significantly reducing triggering latency.
• Dual mode presets now store whether the Z knob has been overridden by MIDI.
• Added functions to save and load all dual mode presets to/from the SD card.
• Added support for viewing and editing Mappings via the preset editor tool.
• Added an option for stereo operation to the Bit Crusher algorithm.
• Added new modes to the Dual Sample and Hold algorithm which use Z as the signal to be sampled and X & Y as the sample triggers.
• Fixed a problem where the Dual Sample and Hold algorithm wouldn't use its custom Z press behaviour by default.
• Fixed a problem with the Round Robin logic in the SD Multisample algorithm.
• Fixed a problem in the Poly Wavetable algorithm which could result in incorrect envelopes if notes were being stolen.
• Fixed a problem where running the Dual VCO algorithm on the right side could cause audio glitches on the left side.
• Added the Multi FX algorithm.
• Added the Oscilloscope algorithm.
• Added the 'Gate offset' parameter to the Poly Wavetable algorithm.
• Added the 'Clocks required' parameter to the Augustus Loop algorithm.
• Added the 'Reverse' parameter to the Granulator algorithm.
• Added 'Start offset' parameters to the SD 6 Triggers algorithm.
• Added 'I2C learn' (like MIDI learn, for I2C).
• Added the 'Enable High Speed SD' setting.
• Added the 'Wake on MIDI/I2C' setting.
• Added an 'Ignore' option to the 'Program Change Option' setting.
• Some parameters, notably the sample folders in the SD Multisample and SD 6 Triggers algorithms, and the wavetable in the Poly Wavetable and Dream Machine algorithms, now wait for the user to confirm their choice (by pressing the encoder) before changing.
• The Looper algorithm now stores the loop play/reverse/octave down states in its presets.
• Modified the 'G' in the large font used by the quantizer algorithms to make it more distinct from the 'C'.
• In dual mode, the help texts for the two sides now have independent scroll positions.
• Dual mode algorithms now send MIDI CCs on parameter changes and preset loads (if enabled in the settings).
• Processing of MIDI 'soft thru' now continues at all times (rather than stopping e.g. during WAV folder load).
• Single mode presets now store which parameter was active when stored.
• Fixed a problem in the SD Multisample algorithm where the Transpose and Octave parameters would not be correctly applied to notes triggered by MIDI.
• Fixed a problem in the Dream Machine algorithm where setting the numerator and denominator parameters via MIDI would produce unpredictable results.
• Fixed the Quantizer 2 algorithm's response to MIDI.
• Added the Granulator algorithm.
• Incorporated disting mk4 firmware versions 4.18 and 4.19.
• Added MTS (MIDI Tuning Standard) support to the SD Multisample and Poly Wavetable algorithms (compatible with MTS-ESP).
• Added the option to send MIDI CCs when changing parameters or loading presets (to update contollers or editors).
• Added dual mode algorithms equivalent to the disting mk4's Stereo Clockable SD Delay algorithms (with the same functionality, but not using the SD card). Since these use slots K-7 and K-8, the disting EX 24dB/oct VCF algorithm is moved from K-8 to K-6.
• Added the 'Output mode' parameter to the SD Multisample algorithm.
• Added the 'LFO retrigger' and 'LFO spread' parameters to the Poly Wavetable algorithm.
• When a preset is loaded or saved, the top line of the display now shows the preset name instead of the algorithm name, until the preset is edited.
• Added the option of using the 'L' and 'R' buttons to step between presets for the current algorithm.
• Added functions to save all presets as individual files to a folder on the SD card, and to load presets files from a folder and install them in flash.
• Added a function to erase a preset in flash.
• Added MIDI activity indicators to the default single mode display.
• Added an 'output key' display to complement the existing 'input key' (when holding 'V').
• Added the 'Gate CV threshold' setting.
• Added a setting so that when a parameter is mapped using MIDI learn, any other mappings using that CC are disabled.
• Dual mode algorithms with Tap Tempo (the Clockable LFO, Delays, and Envelopes) now store the tapped tempo in presets (including the autosaved state).
• The MIDI Playback algorithms no longer output MIDI if the MIDI transmit channel is set to zero.
• Fixed the 'Save all presets to SD card' function, which was only saving the first 31 presets.
• Fixed a problem which could cause all kinds of insiduous failures but mostly was responsible for SD playback modes stuttering and breaking up.
• Fixed a problem in the Poly Wavetable algorithm where adjusting release time while notes were playing could result in the currently playing notes having extremely long release times.
• Fixed a problem when loading a preset for the Poly Wavetable algorithm where it would not correctly resolve the wavetable if the contents of the wavetables folder differed from when the preset was saved.
• Fixed a problem where loading a mapping for the Poly Wavetable algorithm would disable some CV mappings.
• Fixed a problem where the Quantizer 2 algorithm could crash with an out-of-range scale parameter.