Se connecter
Se connecter
Mot de passe oublié ?
ou
Créer un compte
ou
Se connecter avec Facebook
Notifications
< Retour vers Alesis Micron
Agrandir
Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos
Alesis Micron
Photos
1/460
Alesis Micron

Clavier synthétiseur numérique à modélisation analogique de la marque Alesis

38 avis
Acheter
ACHETER D'OCCASION (2) À partir de 200 €
Présentation du produit Présentation
Avis 38 38
Comparateur de prix
Petites annonces Annonces 2 2
Forums 290 290
Tutoriels 3 3

Sujet Nouvelle version de l'OS v1.10 Dispo

  • 22 réponses
  • 10 participants
  • 2 801 vues
  • 10 followers
Sujet de la discussion Nouvelle version de l'OS v1.10 Dispo
Bonne nouvelle

http://www.alesis.com/index.php?id=58,38,0,0,1,0

Le bug "Negative NRPNs" est corrigé

Détail des changements et correctifs:

FEATURE UPDATES AND ENHANCEMENTS:
---------------------------------
Longer Patterns and Rhythms – Rhythms and patterns (including phrases) can now be as long as 16 bars.

Expression Pedal Mode – New config param: "ExprPedal: Route" / "to mods only", "to volume & mods". This provides a means to enable/disable the hardwired route from expression pedal to volume.

MIDI Solo Part – New config param: "MIDI: Send part" / "all parts", "part A only", "part B only", etc. If set to "part x only", only part x will send MIDI data, although all parts will receive MIDI. This is useful when recording a multitimbral arrangement with an external sequencer.

New LFO Reset Modes – New reset modes for LFOs and S/H: "legato mono" and "legato poly". These are similar to "key mono" and "key poly" respectively, except instead of resetting on every keypress, they only reset on non-legato keypresses. As long as you play legato, the LFO will not reset.

Unlatch Part – In a setup, hold down a key and press [latch] to latch parts mapped to that key. Hold the key and double-click [latch] to unlatch those parts. The first few times you latch, a message will pop up to remind you of how to unlatch..

One-Handed Phrase Record – To record a phrase, double-click the [phrase] button and start playing. The old method of holding down [phrase] as you start to play still works as well.

"Use As Drum" Controllers – When a setup part is set to "use as: drum x in beat", the part's pw/m1/m2 controller enables are now applied to the overridden drums in the beats. This allows you to affect the sound of a rhythm using the pitch wheel and sliders.

Control Knob Response – The response of the control knob has been improved for large ranges. By turning the knob quickly, it is now easier to scroll through long menus or make large adjustments to highly granular parameters.

BUGS FIXED:
-----------
Mapping Knobs to FX and Mod Params – FX and mod parameters could not be mapped to the black xyz knobs. Now they can. As with all other parameters, turning the knobs sends MIDI NRPN data which can be recorded and played back.

Negative NRPNs – The MIDI data sent when a knob was turned to negative values could not be received correctly. This has been fixed.

Tempo Memory – The tap tempo setting was not retained when the Micron was turned off. Now it is.

Phrase Key Range – When phrase recording in a setup, all keys played were recorded to the phrase, even keys in other parts. Now, just the keys within the recording part's key range are recorded. This allows you to play on multiple parts as you are recording on one of them.

S/H Startup – The sample-and-hold generator would always start with an output of zero. Now it captures a sample at the start of a voice.

Portamento Legato – For monophonic programs with a long release time, portamento "legato only" mode would always portamento, even if the notes were not played legato. This has been fixed.

VelociUp Mod Source – For monophonic programs with a long release time, the "VelociUp" (key up velocity) mod source would accumulate each time all keys were released. Now, the mod source returns to zero when all keys have been released.

LFO Reset – For monophonic programs, LFOs and S/H in "key mono" or "key poly" reset modes would not reset if the voice was still playing. They now reset on every keypress. However, if you made use of the old behavior, see the new "legato mono" and "legato poly" modes described above.

[store] Light – The [store] button would not light up when changing a pattern or rhythm note's velocity, changing an unquantized note start time, or removing an unquantized note. Now it does.

Envelope Velocity Setting – Changing the envelope 3 velocity param would affect the playing voice's envelope 2 velocity setting. This has been fixed.
Afficher le sujet de la discussion
21
:non: Oui, et bien il semblerait que ce ne soit pas aussi simple que cela... J'essaie depuis des heures d'updater mon Micron, rien à faire: il charge l'OS jusqu'à 99% puis affiche "erreur de transfert, recommencer" :nawak: J'utilise Bome's SendSX 1.22 avec une interface Audiotrak USB MIDI Mate sous WinXP et ai suivi tous les conseils trouvés sur ce forum. J'ai également essayé avec des réglages différents, comme indiqué dans la notice de SendSX, en vain... Si quelqu'un peut m'aider... :((

NB: Pour ceux que ça intéresse, contrairement à ce que je craignais, en cas d'échec de la mise à jour, le synthé n'est pas fichu: il continue de fonctionner avec l'OS d'origine.

Ma chaîne YouTube

22
J'AI REUSSI!!! :fou: J'ai mis à jour le driver de mon interface MIDI (téléchargeable sur le site d'Audiotrak), ai réinstallé SendSX en version 1.30 et ai re-téléchargé le nouvel OS du Micron (pour être sûr que mon fichier ne soit pas corrompu). J'ai ensuite suivi la procédure indiquée par Fredffdtr, en conservant les réglages par défaut de SendSX et en sélectionnant 1-MIDI Mate dans les menus Midi Out et Midi In. Et ça a marché du premier coup! :mdr:

Ma chaîne YouTube

23
Quelqu'un sait s'il y aura d'autre update pour le micron?