Audio-Technica ATW-1302

Écrire un avis ou Demander un avis

Présentation du produit Présentation

Avis

Comparateur de prix

Forums

Sommaire - accès rapide

Annonces ATW-1302

Alerte nouvelle annonce

ATW-RC13 Rack-mount receiver chassis, ATWRU13 receiver unit and ATW-T1002 handheld dynamic unidirectional microphone/transmitter.

System 10 Pro Features

Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
Operates in the 2.4 GHz range – completely free from TV interference
Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
Up to five chassis (ten receiver units) can be linked and used simultaneously
Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
Automatic frequency selection for seamless, interference-free operation
Extremely easy operation with instantaneous channel selection, sync, and setup
Three levels of diversity assurance: frequency, time & space
Ground-lift switch helps eliminate audible hum caused by ground loops

System 10 Pro Specs

Overall System Specs
Operating Frequencies	2.4 GHz ISM band
Dynamic Range	>109 dB (A-weighted), typical
Total Harmonic Distortion	<0.05% typical
Operating Range	60 m (200') Open range env. with no interfering signals
Operating Temperature Range	0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
Frequency Response	20 Hz to 20 kHz Depending on microphone type

Receiver Specs
Receiving System	Diversity (frequency/time/space)
Output Connectors	Remote Receiver Connector: RJ45 Link Connector: RJ12
Maximum Output Level	XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
Power Supply	100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
Dimensions	209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D
Net Weight	940 grams (33.2 oz)
Accessory Included	Power supply
Accessories Included	AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet

Body-Pack Transmitter Specs
RF Power Output	10 mW
Spurious Emissions	Following federal and national regulations
Input Connections	Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
Batteries	Two 1.5V AA not included
Battery Life	>7 hours (alkaline) Depending on battery type and use pattern
Dimensions	70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Net Weight	100 grams (3.5 oz) without batteries

Handheld Transmitter Specs
RF Power Output	10 mW
Spurious Emissions	Following federal and national regulations
Batteries	Two 1.5V AA not included
Battery Life	>7 hours (alkaline) Depending on battery type and use pattern
Dimensions	254.8 mm (10.03") long, 50.0 mm (1.97") diameter
Net Weight	280 grams (9.9 oz) without batteries
Accessory Included	AT8456a Quiet-Flex™ stand clamp

Autres dénominations : atw1302