Annonces Pro Bass 300
Alerte nouvelle annonceImages
Fiche technique
- Fabricant : Carvin
- Modèle : Pro Bass 300
- Catégorie : Têtes d'amplis Basse
- Fiche créée le : 26/03/2018
Power Output 8 ohms 150w, 4 ohms 200w and 2 ohms 300w
Frequency Response 20 to 20k Hz ±1.5 dB
THD 0.1% 20 to 20k Hz at full power
Input Impedance 1 Megohms (Hi) 39k ohms (Lo)
Maximum Input Level before clipping Hi Jack: 1.3Vrms - Lo Jack: 4.5Vrms
Input Sensitivity 30mV for full power
E0 Tone Controls—Bass ±15 dB shelving below 200 Hz
Deep Switch +10 dB @ 40 Hz
Mid (level) ±9 d8
Mid Freq 80 Hz to 2k Hz—sweepabie
Treble ±15 dB peak/dip at 10K Hz
Bright Switch +10 dB 0 5K HZ
Graphic E0 Freq. 75, 150. 500, 1.5K & 3k Hz ±18dB
Compressor (Sustain) 3:1 up to 20 dB compression. Attack time : 200us
Noise Gate (Threshold) 30 dB quieting: Release time: 300m Sec
Electronic Crossover Level Hi and Lo Freq. line outputs: +18 dBV into 600 ohms unbal.
Electronic Crossover Freq 12 dB/oct derived constant voltage—40 Hz to 1k Hz sweepable
Efiects Loop Normalized to 0dB for both send and return
Line Outputs +18 dBV 600ohms unbal. +24 dBV 600ohms bal. XLR
Headphone +18 dBV into 600 ohms per side (mono).
Power Requirements 120/240 VAC 50-60 Hz
Fuse 120V : 5 Amp. 240V: 2.5 Amp—slow-blow 5x20mm
Dimensions 21 "W x 12"D x 8.25"H Shipping Wt: 38 lbs
Distribué par WSL
Autres catégories dans Amplis Basse
Autres dénominations : probass 300, probass300, pro bass300