NUSofting Anything Mod

• Fabricant : NUSofting
• Modèle : Anything Mod
• Catégorie : Autres packs d'effets et multi-effets
• Fiche créée le : 14/08/2015

stereo audio modulation effect plugin with a reverse delay, a ring modulator, a waveshaper, a comb filter, and a glitch generator, all interact with each other, both in the audio path and in the parameters settings, with more to be added in the future

 8 parameters: 

• DryWet : -10 = Bypass, + 10 full Wet
• ModFreq : from 0.5 Hz to 2901 Hz
• FdbkAmnt : from 0 to 11
• MaxFilterFreq : from 23 to 6823 Hz
• MinFilterFreq : from 23 to 6823 Hz
• DepthFilt : from 0 (filter off) to 20
• StereoGlitches : from 0 to 32
• Gain2FX : from 0 (effect off) to 20

- DryWet simply does what it says no needs to explain further.

- ModFreq can go from sub audio to 2901 Hz max, in sub audio range the reverse delay is more effective, ModFreq adjusts the ring modulator, the delay time and the modulation rate of the filters. 

- FdbkAmnt adjust the feedback amount to the delay lines and also the saturation leading to distortion or even whistles.

- MaxFilterFreq and MinFilterFreq have the same range and can be inverted (min bigger than max), that would reverse the waveshape which modulates the filters.

- DepthFilt adjusts the crossfading between the unfiltered and the filtered signal, a DryWet control for the filters only. - StereoGlitches add "jumps" to the pointers that read the two delay lines, but different jumps for each of the two stereo channels.

- Gain2FX adjust the level of the input to the effect.

Anything Mod comes bundled with Tube Gain Booster, a stereo, quick, audio level booster designed to complement the Anything Mod plugin, with two envelope settings for the compressor, these change the response to transients and some of the distortion and three operative modes:

-Mode 1: tube on no bias, mostly odd harmonics added and more gain boosting. 

-Mode 2: tube on with bias, mostly even harmonics added and less gain boosting. 

-Mode 3: tube off, much less harmonics added and less gain boosting.

Tube Gain Booster has 8 parameters:

• CompAmnt : 0 dB to -52 dB, more compression gives also more tube distortion 
• EnvType : "very fast" or "smooth" 
• AlgoSelect : 3 modes. 1) tube on no bias, 2) tube on with bias, 3) tube off 
• Attenuator : -12 dB to +5 dB 
• MaxFilterFreq : input Low Pass, frequency 20 to 16000 Hz 
• MinFilterFreq : input High Pass, frequency 20 to 16000 Hz 
• BlendMixHf : -100 to +5 dB 
• BlendMixLf: -100 to +5 dB

VST and AU plug-ins for Mac OS X and Windows