Problème USB
- 9 réponses
- 6 participants
- 4 490 vues
- 5 followers
chuckblaz
3
Nouvel·le AFfilié·e
Membre depuis 12 ans
fullbazar
1288
AFicionado·a
Membre depuis 19 ans
chuckblaz
3
Nouvel·le AFfilié·e
Membre depuis 12 ans
fullbazar
1288
AFicionado·a
Membre depuis 19 ans
Anonyme
44
Régis
1242
AFicionado·a
Membre depuis 21 ans
jmlesaux
89
Posteur·euse AFfranchi·e
Membre depuis 19 ans
oil63
76
Posteur·euse AFfranchi·e
Membre depuis 15 ans
chuckblaz
3
Nouvel·le AFfilié·e
Membre depuis 12 ans
Anonyme
44
Re-salut
Je t'ai dit avoir eu le même problème que toi
C'est à cause de Vista qui merdouille avec les drivers livrés avec la boite
Tu as ci-après l'adresse pour télécharger le driver vista 32 bits
et les explications pour l'instllation
Bon week end
https://www.roland.com/support/article/?q=downloads&p=DR-880&id=1812384
Installation
* To reinstall or update the driver, refer to "To reinstall <#anchor0400>."
1. Start up Windows with all USB cables disconnected.
(except for keyboard and mouse)
2. Exit all applications before you begin the installation.
3. Double-click the *Setup* icon.
* If a message informs you that "Driver installation must be
performed by an administrator," you must log on to Windows as a
user whose account type is *Administrator*, and then perform the
installation.
4. A confirmation screen regarding User Account Control will appear,
click [continue].
5. The message "BOSS DR-880 Driver will be installed on your
computer. ---" will appear. Click [next].
* If any other message appears, follow the directions of the message.
6. Click [next] to begin installation.
7. If a dialog box regarding Windows Security appears, click [install].
8. The screen will indicate "The DR-880 driver has been installed."
* If any other message is displayed, proceed according to the
contents of that message.
9. Use a USB cable to connect the DR-880 to your computer, then turn
on the DR-880.
10. The lower right corner of the screen will indicates "Installing
device driver software," and the driver will be installed
automatically.
* If any other message is displayed, note the contents and close
the message.
11. When the lower right corner of the screen indicates "Device driver
software installed successfully," installation is complete.
Click [close] to close the "Driver Setup" dialog box.
12. If the "System Settings Change" dialog box appears, click [yes] to
restart Windows.
13. Refer to "Before you begin <#anchor0200>," and make the necessary
settings for using the DR-880. You won't be able to use the DR-880
unless you make these settings.
* If you are unable to use the DR-880 after connecting it, it's
possible that a problem has occurred. Refer to "Troubleshooting
<#anchor0600>."
------------------------------------------------------------------------
Before you begin
Input/output device settings for your application
In the application(s) that you intend to use, specify the MIDI device
they are to use. (For details on this setting, refer to the owner's
manual for your application.)
* If you are unable to select the DR-880 device, a problem may have
occurred. Refer to "Troubleshooting <#anchor0600>."
MIDI input/output device
* In the Windows Media Player, the MIDI input/output device of DR-880
cannot be used.
Please select the following device in your MIDI compatible application.
[midi OUT devices]
BOSS DR-880
[midi IN devices]
BOSS DR-880
------------------------------------------------------------------------
To change the settings
To change or verify settings
1. When changing driver settings, always make sure to first quit all
applications using the DR-880. This is unnecessary when only
checking the settings.
2. Open "Control Panel," click "Additional Options," and then click
"BOSS DR-880."
* If you're using the Classic View, double-click "BOSS DR-880."
3. The "*BOSS DR-880 Driver Settings*" dialog box will appear.
4. To modify the settings, make the changes and click [ok]. To simply
check the settings, be sure to click [cancel] after viewing the
settings.
* For details on the setting items, refer to "About the items in
the Settings dialog box <#anchor0320>."
About the items in the Settings dialog box
The "Light Load" check box
Normally, you should leave this check box cleared.
* The modified setting will take effect after you turn the power of
the DR-880 on/off.
Information
This field shows the driver version.
------------------------------------------------------------------------
To reinstall
1. Delete the driver as described in "To uninstall <#anchor0500>."
* When you uninstall, the settings of the setup dialog box will be
initialized. For details on the setting items, refer to "About the
items in the Settings dialog box <#anchor0320>."
2. Install the driver as described in "Installation <#anchor0100>."
------------------------------------------------------------------------
To uninstall
1. Start Windows with all USB cables disconnected.
(except the keyboard and mouse)
2. Open "Control Panel" and click "Uninstall a program."
* If you're using the Classic View, double-click the "Programs and
Features" icon.
3. In the list, choose BOSS DR-880 Driver, and click "Uninstall/Change."
4. If a dialog box regarding User Account Control appears, click
[continue].
* If you are asked to enter the password for an administrative
account, log on to Windows as a user whose account type is
Administrator, and then perform the uninstallation.
5. The display will indicate "The installed BOSS DR-880 Driver will
be uninstalled." and click the [ok].
6. The display will indicate "You must restart the operating system
in order to complete the uninstallation." and click the [yes].
Windows will restart.
------------------------------------------------------------------------
Troubleshooting
Cannot install/uninstall the driver
Are you logged onto Windows with the appropriate user rights?
You must log on to Windows as a user whose account type is
Administrator.
* For more information regarding this, consult your computer system
administrator.
Cannot select/use the DR-880 device
Was the driver installed correctly?
If you can't use the DR-880 even though you've installed the driver,
the driver might not be installed correctly. Use the procedure
described in "To reinstall <#anchor0400>" to reinstall the driver.
Is the DR-880 MIDI device name displayed?
If the device name is not displayed, exit all applications that are
using the DR-880, and turn the power of the DR-880 off, then on again.
If this does not solve the problem, use the procedure described in
"To reinstall <#anchor0400>" to reinstall the driver.
Did the computer enter a sleep mode while the DR-880 was connected with
its power turned on?
If the DR-880 does not work correctly after resuming from sleep
mode, you should exit all applications that use the DR-880, and then
turn the power of the DR-880 off and on again.
Was the USB cable disconnected and reconnected while the DR-880 was
being used, or was the power of the DR-880 turned off, then on again?
If the USB cable is disconnected and reconnected while the DR-880 is
in use, or if the power of the DR-880 is turned off, then on again,
it may no longer operate correctly. If this occurs, exit all
applications that are using the DR-880, and turn the power of the
DR-880 off, then on again.
On some computers, if the DR-880 is connected while Windows starts up,
the driver will not be loaded correctly, and it will not be possible to
use the DR-880 via USB.
If this occurs, start up Windows before you turn on the power of the
DR-880 or connect it.
A number such as "2-" is now displayed at the beginning of the
device name
Could you have connected the DR-880 to a different USB port?
If you connect the DR-880 to a different USB port, the operating
system may automatically add a number to the beginning of the device
name.
Even if this occurs, it will not cause any problems with the
operation of the DR-880.
* If you want to restore the device name that does not have this added
number, connect the DR-880 to the same USB port as when you installed
it, or reinstall the driver as described in "Reinstalling <#anchor0400>."
Cannot play back/record
Was the driver installed correctly? <#anchor0621>
Did you make settings as described in "Before you begin" so that the
DR-880 driver could be used?
The DR-880 cannot be used unless you make these settings. Refer to
the sections on "Before you begin <#anchor0200>."
Could you have entered sleep mode during playback or recording?
If the DR-880 does not work correctly after resuming from sleep
mode, you should exit all applications that use the DR-880, and then
turn the power of the DR-880 off and on again.
During playback or recording, did you turn the power of the DR-880
on/off, or disconnect and reconnect the USB cable?
If you turn the power of the DR-880 on/off or disconnect and
reconnect the USB cable during playback or recording, the DR-880
will no longer be able to play back or record. Stop playback or
recording, and then start playback or recording once again. If you
are still unable to play back or record, quit all programs that are
using the DR-880, then turn the DR-880 off and then on again.
Part of the playback is wrong: e.g., notes are broken off
prematurely, or some notes are lost
Problems may be solved by making the settings shown below.
"Performance Options" settings of System Properties
1. Open "Control Panel," click "System and Maintenance," and then
click "System."
* If you're using the Classic View, double-click the "System"
icon.
2. In the Tasks shown at the left, click "Advanced system settings."
3. A dialog box regarding User Account Control will appear, so
click [continue].
* If you are asked to enter the password of an Administrator
account, log on to Windows as a user whose account type is
Administrator, then perform the settings again.
4. Click [settings] of the Performance section, and then click
the [advanced] tab.
5. Select "Background services," and click [ok].
6. Click [ok] to close "System Properties."
Such problems may be solved if you check the "Light Load" check box.
If you wish to modify or verify the settings, use the procedure
described in "To change the settings <#anchor0300>."
* The modified setting will take effect after you turn the power of
the DR-880 on/off. Unless you experience problems, use the unchecked
(initial) setting.
------------------------------------------------------------------------
Copyright (C) 2007 Roland Corporation. All rights reserved.
Je t'ai dit avoir eu le même problème que toi
C'est à cause de Vista qui merdouille avec les drivers livrés avec la boite
Tu as ci-après l'adresse pour télécharger le driver vista 32 bits
et les explications pour l'instllation
Bon week end
https://www.roland.com/support/article/?q=downloads&p=DR-880&id=1812384
Installation
* To reinstall or update the driver, refer to "To reinstall <#anchor0400>."
1. Start up Windows with all USB cables disconnected.
(except for keyboard and mouse)
2. Exit all applications before you begin the installation.
3. Double-click the *Setup* icon.
* If a message informs you that "Driver installation must be
performed by an administrator," you must log on to Windows as a
user whose account type is *Administrator*, and then perform the
installation.
4. A confirmation screen regarding User Account Control will appear,
click [continue].
5. The message "BOSS DR-880 Driver will be installed on your
computer. ---" will appear. Click [next].
* If any other message appears, follow the directions of the message.
6. Click [next] to begin installation.
7. If a dialog box regarding Windows Security appears, click [install].
8. The screen will indicate "The DR-880 driver has been installed."
* If any other message is displayed, proceed according to the
contents of that message.
9. Use a USB cable to connect the DR-880 to your computer, then turn
on the DR-880.
10. The lower right corner of the screen will indicates "Installing
device driver software," and the driver will be installed
automatically.
* If any other message is displayed, note the contents and close
the message.
11. When the lower right corner of the screen indicates "Device driver
software installed successfully," installation is complete.
Click [close] to close the "Driver Setup" dialog box.
12. If the "System Settings Change" dialog box appears, click [yes] to
restart Windows.
13. Refer to "Before you begin <#anchor0200>," and make the necessary
settings for using the DR-880. You won't be able to use the DR-880
unless you make these settings.
* If you are unable to use the DR-880 after connecting it, it's
possible that a problem has occurred. Refer to "Troubleshooting
<#anchor0600>."
------------------------------------------------------------------------
Before you begin
Input/output device settings for your application
In the application(s) that you intend to use, specify the MIDI device
they are to use. (For details on this setting, refer to the owner's
manual for your application.)
* If you are unable to select the DR-880 device, a problem may have
occurred. Refer to "Troubleshooting <#anchor0600>."
MIDI input/output device
* In the Windows Media Player, the MIDI input/output device of DR-880
cannot be used.
Please select the following device in your MIDI compatible application.
[midi OUT devices]
BOSS DR-880
[midi IN devices]
BOSS DR-880
------------------------------------------------------------------------
To change the settings
To change or verify settings
1. When changing driver settings, always make sure to first quit all
applications using the DR-880. This is unnecessary when only
checking the settings.
2. Open "Control Panel," click "Additional Options," and then click
"BOSS DR-880."
* If you're using the Classic View, double-click "BOSS DR-880."
3. The "*BOSS DR-880 Driver Settings*" dialog box will appear.
4. To modify the settings, make the changes and click [ok]. To simply
check the settings, be sure to click [cancel] after viewing the
settings.
* For details on the setting items, refer to "About the items in
the Settings dialog box <#anchor0320>."
About the items in the Settings dialog box
The "Light Load" check box
Normally, you should leave this check box cleared.
* The modified setting will take effect after you turn the power of
the DR-880 on/off.
Information
This field shows the driver version.
------------------------------------------------------------------------
To reinstall
1. Delete the driver as described in "To uninstall <#anchor0500>."
* When you uninstall, the settings of the setup dialog box will be
initialized. For details on the setting items, refer to "About the
items in the Settings dialog box <#anchor0320>."
2. Install the driver as described in "Installation <#anchor0100>."
------------------------------------------------------------------------
To uninstall
1. Start Windows with all USB cables disconnected.
(except the keyboard and mouse)
2. Open "Control Panel" and click "Uninstall a program."
* If you're using the Classic View, double-click the "Programs and
Features" icon.
3. In the list, choose BOSS DR-880 Driver, and click "Uninstall/Change."
4. If a dialog box regarding User Account Control appears, click
[continue].
* If you are asked to enter the password for an administrative
account, log on to Windows as a user whose account type is
Administrator, and then perform the uninstallation.
5. The display will indicate "The installed BOSS DR-880 Driver will
be uninstalled." and click the [ok].
6. The display will indicate "You must restart the operating system
in order to complete the uninstallation." and click the [yes].
Windows will restart.
------------------------------------------------------------------------
Troubleshooting
Cannot install/uninstall the driver
Are you logged onto Windows with the appropriate user rights?
You must log on to Windows as a user whose account type is
Administrator.
* For more information regarding this, consult your computer system
administrator.
Cannot select/use the DR-880 device
Was the driver installed correctly?
If you can't use the DR-880 even though you've installed the driver,
the driver might not be installed correctly. Use the procedure
described in "To reinstall <#anchor0400>" to reinstall the driver.
Is the DR-880 MIDI device name displayed?
If the device name is not displayed, exit all applications that are
using the DR-880, and turn the power of the DR-880 off, then on again.
If this does not solve the problem, use the procedure described in
"To reinstall <#anchor0400>" to reinstall the driver.
Did the computer enter a sleep mode while the DR-880 was connected with
its power turned on?
If the DR-880 does not work correctly after resuming from sleep
mode, you should exit all applications that use the DR-880, and then
turn the power of the DR-880 off and on again.
Was the USB cable disconnected and reconnected while the DR-880 was
being used, or was the power of the DR-880 turned off, then on again?
If the USB cable is disconnected and reconnected while the DR-880 is
in use, or if the power of the DR-880 is turned off, then on again,
it may no longer operate correctly. If this occurs, exit all
applications that are using the DR-880, and turn the power of the
DR-880 off, then on again.
On some computers, if the DR-880 is connected while Windows starts up,
the driver will not be loaded correctly, and it will not be possible to
use the DR-880 via USB.
If this occurs, start up Windows before you turn on the power of the
DR-880 or connect it.
A number such as "2-" is now displayed at the beginning of the
device name
Could you have connected the DR-880 to a different USB port?
If you connect the DR-880 to a different USB port, the operating
system may automatically add a number to the beginning of the device
name.
Even if this occurs, it will not cause any problems with the
operation of the DR-880.
* If you want to restore the device name that does not have this added
number, connect the DR-880 to the same USB port as when you installed
it, or reinstall the driver as described in "Reinstalling <#anchor0400>."
Cannot play back/record
Was the driver installed correctly? <#anchor0621>
Did you make settings as described in "Before you begin" so that the
DR-880 driver could be used?
The DR-880 cannot be used unless you make these settings. Refer to
the sections on "Before you begin <#anchor0200>."
Could you have entered sleep mode during playback or recording?
If the DR-880 does not work correctly after resuming from sleep
mode, you should exit all applications that use the DR-880, and then
turn the power of the DR-880 off and on again.
During playback or recording, did you turn the power of the DR-880
on/off, or disconnect and reconnect the USB cable?
If you turn the power of the DR-880 on/off or disconnect and
reconnect the USB cable during playback or recording, the DR-880
will no longer be able to play back or record. Stop playback or
recording, and then start playback or recording once again. If you
are still unable to play back or record, quit all programs that are
using the DR-880, then turn the DR-880 off and then on again.
Part of the playback is wrong: e.g., notes are broken off
prematurely, or some notes are lost
Problems may be solved by making the settings shown below.
"Performance Options" settings of System Properties
1. Open "Control Panel," click "System and Maintenance," and then
click "System."
* If you're using the Classic View, double-click the "System"
icon.
2. In the Tasks shown at the left, click "Advanced system settings."
3. A dialog box regarding User Account Control will appear, so
click [continue].
* If you are asked to enter the password of an Administrator
account, log on to Windows as a user whose account type is
Administrator, then perform the settings again.
4. Click [settings] of the Performance section, and then click
the [advanced] tab.
5. Select "Background services," and click [ok].
6. Click [ok] to close "System Properties."
Such problems may be solved if you check the "Light Load" check box.
If you wish to modify or verify the settings, use the procedure
described in "To change the settings <#anchor0300>."
* The modified setting will take effect after you turn the power of
the DR-880 on/off. Unless you experience problems, use the unchecked
(initial) setting.
------------------------------------------------------------------------
Copyright (C) 2007 Roland Corporation. All rights reserved.
- < Liste des sujets
- Charte