Source Audio Kingmaker Fuzz

La Kingmaker est une pédale numérique avec 3 différentes fuzz (Heavy / Normal / Octave). Elle a 3 emplacements mémoire (un par "circuit") et 2 des 3 "circuits" peuvent être utilisés simultanément en série ou en parallèle. En vous connectant à l'éditeur gratuit Neuro, vous aurez accès à plus 40 émulations de pédales de gain pour guitare et basse, que vous pourrez télécharger dans la pédale. De plus en branchant le Neuro Hub (anciennement Soundblox Hub), vous aurez accès aux fonctionnalités MIDI incluant la sauvegarde jusqu'à 128 presets.

General

• Model Number: SA245
• Bypass: True Bypass or Buffered Bypass
• Number of Presets: 3
• Stackable Drive Engines:  Dual drive engines and stereo inputs and outputs make it possible (via the Neuro App) to stack any combination of drive engines in either series or parallel as well as split the signal and send a separate drive engine to each of the pedal’s outputs.
• Controls:
  • Drive Knob: Controls the amount of gain into the fuzz circuit, which sets the amount of distortion and sustain.
  • Level Knob: Controls the overall output level.
  • Bass Knob: Controls the level of the bass frequencies in the drive circuit.
  • Treble Knob: Controls the level of the treble frequencies in the drive circuit.
  • Effect switch: Heavy / Normal / Octave
• Connectors:
  • Input 1: primary input for guitar, bass, or other instruments. It can also accept line-level inputs.
  • Input 2: audio input or data connection for the Neuro App, or both at the  same time.
  • Output 1: primary output. Connect it to your amplifier, recording interface, or the next device in  your effects signal chain.
  • Output 2: audio output or the daisy-chain data connection for the Neuro App, or both.
  • USB
  • Control Input (3.5 mm): connects to external control devices such as the Dual Expression  Pedal, Reflex Universal Expression Pedal, Neuro Hub, and Hot Hand Motion Controller. 
  • Power: 9V DC
• Full MIDI capability (and 128 presets) with the Neuro Hub (formerly Soundblox Hub)
• Power Supply & 1/8” to 1/4” cable for Neuro Mobile App connection included

Technical Data

• Maximum Input Level: +6 dBV = 8.2 dBu = 2 V RMS = 5.6 V p-p
• Input Impedance: 1 MegaOhm
• Output Impedance: 600 Ohm
• 108 dB DNR Audio Path
• 24-bit Audio Conversion
• 56-bit Digital Data Path
• Power: 9V DC (center negative)
• Current Draw: 180 mA
• Dimensions (including knobs): 11.63 x 7.00 x 5.61 cm / 4.58 x 2.75 x 2.21 in
• Weight: 280 grams / 0.625 pounds