OS UpgradeAnalog Rytm MKI/MKII V1.50

Séquenceur MIDI OUT
- Scale individuel par track
- Paramètres aléatoires
- Tempo par pattern
+ Bug fix

Scale par piste c'est pour la longueur et le coef multiplicateur par piste.

En revanche, j'ai pas bien comprendu quel potar permet maintenant de modifier tous les paramètres à la fois.

List of changes from OS 1.45b to 1.50

Improvements
All sequencer tracks can now be set to send sequencer data through the MIDI OUT or USB ports to control external, MIDI equipped, gear. Each track sends note on/off and velocity data over MIDI.
Added the possibility to set individual scale (speed of track playback set in multiples of the current tempo) per track.
Implemented the functionality to randomize the parameter values on a parameter page. Press [parameter] + [yes] to randomize parameters.
There is now an option to set a specific tempo for every pattern within a project.
[mkii] It is now possible to control multiple performance macros simultaneously with the QUICK PERF AMOUNT knob.
[mkii] Added the possibility to select audio over USB as a sample source.
Pressing the [pads] now automatically changes active track. This is the default setting for new projects, but can be turned off in the SEQUENCER CONFIG menu.
[mkii] New graphics are added for several parameters related to the filter, envelopes, and FXs.
[mkii] Improved knob graphics to better display the min, middle, and max values.
[mkii] Sample waveform view has been added on SMPL PAGE 2.
[mkii] Updated the graphics in the CONTROL INPUT 1/2 menus.
Pressing and holding FUNC, and then turning the knob for the DELAY TIME parameter now snaps to a set of fixed values instead of an offset to the previous value.
The user is now prompted to select SysEx transfer interface when sending project backups and USB+MIDI is selected.
[mkii] The LOAD PROJECT and SAVE PROJECT menus now include a header.

Bug fixes
[mkii] The device would freeze under some circumstances.
Notes would sometimes sustain indefinitely if they were played and held when switching to PLAY, MUTE, SCENE, and PERFORMANCE modes.
Notes would sometimes sustain indefinitely if the [pads] triggering them is pressed and held when switching to PLAY, MUTE, SCENE, and PERFORMANCE modes.
Notes would sometimes sustain indefinitely if the [trig] key triggering them is pressed and held when pressing [bank] and then released before pattern selection timed out.
Scene and Performance edit windows sometimes overlapped other pages wrongly.
When two tracks that shares the same voice, it was under some circumstances possible to trigger a sample on the second track with a trig set on the first track.
When PRESSURE DEST was set to EXT the pressure/aftertouch still affected the performances in performance mode.
Even with nothing connected to EXP/CV IN 1/2, modulation was added to the assigned parameter when the modulation depth was turned up.
[mki] When naming a newly created directory in the sample manager, the "pen" icon on the NAMING menu was at the wrong place.
Trigs on the FX track placed on the same step as a trig on a drum track prevented trig LED indications on the drum tracks pad when in MUTE mode.
[mki] Clearing a pattern (BANK) + TRIG + Play) resulted in an exception error.
Polyphonic aftertouch was not received over MIDI on track 1.
[mkii] CONTROL IN 1/2 MOD modulation settings was not updated when changing kits.
[mkii] The TRACK LEVEL graphics showed max and min settings before the actual max and min value was reached.
[mkii] Any settings made in CONTROL INPUT 1/2 were not automatically applied on boot.
The more space used on the +Drive, the longer time it took to save recorded samples.
Parameters could get inverted when modulated with pitch bend at -64. For example, with PAN set to 0 and modulated with pitch bend: PB +63 (max)= full pan left, PB -63 = full pan right, PB -64 (min) = full pan left.
[mkii] It was erroneously possible to toggle bipolar behavior in CONTROL IN MOD setup menus.
There were incorrect start values when creating a non-kit lock such as trig condition or note length, if the trig contained a sound slot lock.
Trigs with PRE and NOT PRE conditions did not trigger correctly the first time a pattern played.
[mkii] Some encoders were set to change their parameters at the wrong speed.
The pattern selection mode was not exited correctly when the pattern/bank selection pop-up window was closed by another pop-up window opening.
[mkii] CONTROL INPUT 1/2 CV settings of zero/max was not applied until the menu was closed.
[mkii] The STORAGE screen could wrongly display a negative usage percentage.
The selection of characters on the NAMING menu pop-up screen, using the LEVEL/DATA knob did not behave correctly.
It was not possible to edit chains when not in CHAIN mode.
The sequencer started after preroll, even if it was stopped before the end of the preroll.
The shortcut [func] + [up]/[down] on the SCALE menu to change length in increments of 16, only worked for the M.LEN parameter, but not for the TRACK LEN and PATTERN LEN parameters.

Scale par piste c'est pour la longueur et le coef multiplicateur par piste.

Citation :

Séquenceur MIDI OUT
- Scale individuel par track
- Paramètres aléatoires
- Tempo par pattern
+ Bug fix

Pareil pour l'A4, j'ai gagné 18 pistes midi gratos!