L'envie m'a pris de la rhabiller, j'ai donc surfé sur la vague du Web (Quelle prose! ) en quête d'informations.
Pour ce qui est du haut-parleur, mis à part quelques photos, il y a autant d'infos que de puces sur la tête d'un chauve. Donc pour résumé...
Special 18" subwoofer with a 4" voice coil and a long cone excursion for minimal
distortion at full power and high efficiency and high power handling capacity (600 Watt).
• Large wooden vent for minimal noise.
• Optimal Q-load for a very smooth and deep frequency response.
• Switchable active/passive crossover usage. (No disassembly of the passive
crossover needed)
• Phase reverse switch for the satellite system for maximum sound pressure with less power.
• Advanced transducer cooling system for higher power handling capacity.
• Black spray painted 18mm plywood cabinet (13 layers).
The DAP X-Series is a new collection of professional high quality loudspeaker systems which are designed and developed by the DAP Audio R&D department in the Netherlands. Special attention is given to the transducers, high drivers, horn flares and passive crossovers, which will result in a wide coverage of the audience, optimal off-axis response (no mid dip) and optimal throw. The result is higher power handling capacity, high efficiency and a very wide and smooth frequency response at any listening position. All the transducers have optimized Thiele Small Parameters and the high drivers have a very high efficiency which gives the freedom of more power handling capacity, usage of high frequency correction and a transparent sound at the highest frequencies.
Technical Info
Nominal Impedance: 8 Ohm
RMS Power Rating: 600 Watt
Program Power Rating: 1200 Watt
Peak Power Rating: 2400 Watt
Crossover Frequency L-H: 160Hz, 12-6 dB/oct
Sensitivity (Half Space): 104 dB/W/m
Maximum SPL at 1m: 138dB
Frequency Range: (-10 dB): 32-160Hz
Frequency Response: (±3 dB): 38-160Hz
Pin Connection: 1+/1-
Dimensions (WxHxD): 600x760x600cm
Net Weight: 49Kg ,
Outre les mesures de la caisse (Cfr ci avant), quelqu'un pourrait-il me fournir les côtes de l'event?
Et plus si possible...
- sur le revêtement intérieur? Il semblerait qu'il y ai une couche d'isolant (8mm?).
- Renforts, tassaux, etc...
- petite photo de l'intérieur...(Oui j'abuse )