Annonces 4041-S
Alerte nouvelle annonceImages
Fiche technique
- Fabricant : DPA Microphones
- Modèle : 4041-S
- Série : d:dicate
- Catégorie : Microphones à électret
- Fiche créée le : 23/05/2007
| Directional characteristics | Omni |
|---|---|
| Principle of operation | Pressure |
| Cartridge type | 24 mm (1 in) condenser w. stainless steel diaphragm |
| Frequency range, ± 2 dB | 10 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz |
| Sensitivity, nominal, ±2 dB | 90 mV/Pa;-21 dB re. 1 V/Pa |
| Equivalent noise level A-weighted | Max. 7 dB(A) re. 20 µPa |
| Equivalent noise level ITU-R BS.468-4 | Max. 19 dB |
| S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL) | 87 dB |
| Total harmonic distortion (THD) | < 1% THD up to 126 dB SPL peak |
| Dynamic range | Typ. 119 dB |
| Max. SPL, peak before clipping | 144 dB |
| Output impedance | Matches external power supply input |
| Cable drive capability | From microphone to external power supply: Up to 20 m (66 ft). From external power supply: Up to 300 m (984 ft) |
| Power supply | Via external power supply |
| Connector | 7-pin modified XLR-M (High Voltage) |
| Weight | 190 g (6.7 oz) |
| Length | 170 mm (6.7 in) |
Source : http://www.dpamicrophones.com/en/produkter.aspx?c=Item&item=24018&category=234
Distribué par Audio 2
»
Autres microphones à électret DPA Microphones
Autres catégories dans Microphones à condensateur
Autres dénominations : 4041s, 40 41 s, 40 41s