Sortie du plug-in SKNote Rev250

Originally Posted by quintosardo
This is the original version. The V2, M1 and M2 buttons let you see planned expansion, we need some real world use and suggestions about the road to go with these. A good idea could be adding an internal limiter to avoid overloading.

The Input knob works right! You should be able to see the meter going up when increasing gain. It is an input gain compensated for by an opposite attenuation at the inpit. It lets you manage the internalworking level. The hardware has a 12/15 bit A/D conversion stage with a special enhancement system (adds those 12 -> 15 bits by dynamic amplification) which is modeled here. The internal level sets how the bits are used. Decrease gain for lower resolution, increase it for higher resolution.
A typical situation is when you use the reverb in a send channel and set very low send levels from the tracks. The reverb would work with very low internal levels. Just raise the gain control for a smoother sound.
Or viceversa decrease it to make it more grainy (less bits). Often it is interesting.