John Bowen Solaris 2.0 - Modulation FM, Phase distortion, Multi 4 parts
- 34 réponses
- 8 participants
- 1 892 vues
- 9 followers
Afficher le sujet de la discussion
tinhu
3468
Squatteur·euse d’AF
Membre depuis 19 ans
Hors sujet :
Moi j'attends toujours le test du trautonium, moi d'abord !
"Switched on bach"
delchambre
3197
Squatteur·euse d’AF
Membre depuis 19 ans
delchambre
3197
Squatteur·euse d’AF
Membre depuis 19 ans
Je prends les paris, la 2.1 sortira avant le test de Synthwalker, on est à 2 Orval, 2 Chimay (couleur au choix), 2 Trappes contre 1 kro 
Dernier Youtube : https://bit.ly/3fArwjO
Le groupe: Khohd (Post Metal / Post Rock)
Les trucs persos: remix&versions persos - Compos et Compotines AF - Mixages "blues/jazz/rock" - Vidéos kitch
delchambre
3197
Squatteur·euse d’AF
Membre depuis 19 ans
@synthwalker je vais me taper une kro, je suis ravi 
De mon côté tous mes soucis sont résolus depuis la beta 2.0.0.4
Mais voici sa release officielle.
Changelog for Version 2.0.1:
Fixed a bug in which the EGReset parameter worked the opposite way when PlayMode was set to Poly.
Fixed a bug in which changing a parameter and then increasing the number of voices in the part would result in not all voices getting that parameter change.
Fixed a bug in which part volume had no effect on the volume when the VCA level was set to zero and modulation sources were used to increased the volume.
Part volume and pan controls now send a continuous controller message over MIDI rather than a SysEx parameter change message.
The universal SysEx command for master volume is now supported.
Fixed a bug in which the rightmost encoder of the filter section always represented filter 1 regardless of which filter was actually selected.
Fixed a bug in which the part volume parameter had no effect on the part's volume when the VCA level was set to zero and was being modulated.
Fixed a bug in which WAV Wave values above 15 and VS Wave value above 64 could not be saved to a preset file.
Fixed a bug in which the SendArp parameter didn't work correctly.
Fixed a bug in which the arp and sequencer were waiting for a real time Start message when the clock source was set to Internal but they should not have been.
Fixed a bug in which the Solaris was not sending clocks over MIDI when in Send mode and was not sending out real time messages when RealTime was On and the clock source was internal.
Fixed the SysEx message block for System/MIDI parameters.
Fixed a bug in which MIDI clocks were not received on USB when the clock source was set to Ext.
Added the EnblPrt parameter on the System page. This reverses the Shift behavior of the Enable Part buttons when set to "Ver 1".
Fixed a bug in which right after bootup the data wheel did nothing while on the PartLoad page until some parameter was adjusted with an encoder.
Fixed a bug in which the Inc/Dec buttons did not change the preset while on the PartLoad page.
When in preset mode and holding the Tempo button, entering a number with the numpad changed the preset. This is fixed so that now it changes the tempo.
Fixed a bug in which the part names of the PartLoad page were not updated correctly after a preset was saved.
When returning to the PartName page from various other pages, sometimes the encoders didn't work. This is fixed.
Fixed a bug in which an Enable Part LED may start to blink when changing the source or destination on the CopyPart page.
Fixed a bug in which canceling an object copy operation (by pressing a non-object button or turning an encoder) left the LED in the OFF state.
Fixed a bug with polychain in which a note-on was incorrectly sent out when a part was in mono mode.
Fixed a bug with polychain in which the wrong note was sent to the slave when part transpose was non-zero.
The sequencer should now work correctly with polychain on. Note that the notes generated by the sequencer are not overflowed to the slave but rather the notes played on the keyboard are.
The solo function should now also solo the corresponding part in the slave when polychain is on.
The Hold button now sustains the slave when polychain is on.
Fixed the SysEx block for System parameters which was missing a couple of parameters.
Fixed a bug in which the sequencer may cause a stuck note on the master when polychain is enabled.
Fixed a bug in which adjusting the volume knob may cause the arpeggiator to get disrupted.
Fixed a bug in which stuck notes could occur on an external synth, i.e. rack. (Caused by MIDI note-off messages sent out having the wrong MIDI channel.)
Pressing the Hold button now sends a SysEx message over MIDI even when polychain is not enabled.
Fixed a bug in which a program change message was being sent out to MIDI even when the PrgChng parameter was OFF.
A full SysEx preset can now be received from MIDI if it is in the same form as is sent out by the "Xmit Pre" parameter.
Fixed a bug in which pressing Shift+Store could result in the Shift button getting stuck on.
De mon côté tous mes soucis sont résolus depuis la beta 2.0.0.4
Mais voici sa release officielle.
Changelog for Version 2.0.1:
Fixed a bug in which the EGReset parameter worked the opposite way when PlayMode was set to Poly.
Fixed a bug in which changing a parameter and then increasing the number of voices in the part would result in not all voices getting that parameter change.
Fixed a bug in which part volume had no effect on the volume when the VCA level was set to zero and modulation sources were used to increased the volume.
Part volume and pan controls now send a continuous controller message over MIDI rather than a SysEx parameter change message.
The universal SysEx command for master volume is now supported.
Fixed a bug in which the rightmost encoder of the filter section always represented filter 1 regardless of which filter was actually selected.
Fixed a bug in which the part volume parameter had no effect on the part's volume when the VCA level was set to zero and was being modulated.
Fixed a bug in which WAV Wave values above 15 and VS Wave value above 64 could not be saved to a preset file.
Fixed a bug in which the SendArp parameter didn't work correctly.
Fixed a bug in which the arp and sequencer were waiting for a real time Start message when the clock source was set to Internal but they should not have been.
Fixed a bug in which the Solaris was not sending clocks over MIDI when in Send mode and was not sending out real time messages when RealTime was On and the clock source was internal.
Fixed the SysEx message block for System/MIDI parameters.
Fixed a bug in which MIDI clocks were not received on USB when the clock source was set to Ext.
Added the EnblPrt parameter on the System page. This reverses the Shift behavior of the Enable Part buttons when set to "Ver 1".
Fixed a bug in which right after bootup the data wheel did nothing while on the PartLoad page until some parameter was adjusted with an encoder.
Fixed a bug in which the Inc/Dec buttons did not change the preset while on the PartLoad page.
When in preset mode and holding the Tempo button, entering a number with the numpad changed the preset. This is fixed so that now it changes the tempo.
Fixed a bug in which the part names of the PartLoad page were not updated correctly after a preset was saved.
When returning to the PartName page from various other pages, sometimes the encoders didn't work. This is fixed.
Fixed a bug in which an Enable Part LED may start to blink when changing the source or destination on the CopyPart page.
Fixed a bug in which canceling an object copy operation (by pressing a non-object button or turning an encoder) left the LED in the OFF state.
Fixed a bug with polychain in which a note-on was incorrectly sent out when a part was in mono mode.
Fixed a bug with polychain in which the wrong note was sent to the slave when part transpose was non-zero.
The sequencer should now work correctly with polychain on. Note that the notes generated by the sequencer are not overflowed to the slave but rather the notes played on the keyboard are.
The solo function should now also solo the corresponding part in the slave when polychain is on.
The Hold button now sustains the slave when polychain is on.
Fixed the SysEx block for System parameters which was missing a couple of parameters.
Fixed a bug in which the sequencer may cause a stuck note on the master when polychain is enabled.
Fixed a bug in which adjusting the volume knob may cause the arpeggiator to get disrupted.
Fixed a bug in which stuck notes could occur on an external synth, i.e. rack. (Caused by MIDI note-off messages sent out having the wrong MIDI channel.)
Pressing the Hold button now sends a SysEx message over MIDI even when polychain is not enabled.
Fixed a bug in which a program change message was being sent out to MIDI even when the PrgChng parameter was OFF.
A full SysEx preset can now be received from MIDI if it is in the same form as is sent out by the "Xmit Pre" parameter.
Fixed a bug in which pressing Shift+Store could result in the Shift button getting stuck on.
Dernier Youtube : https://bit.ly/3fArwjO
Le groupe: Khohd (Post Metal / Post Rock)
Les trucs persos: remix&versions persos - Compos et Compotines AF - Mixages "blues/jazz/rock" - Vidéos kitch
[ Dernière édition du message le 13/03/2021 à 07:55:47 ]
synthwalker
12095
Rédacteur·trice
Membre depuis 21 ans
chapolin
10527
Drogué·e à l’AFéine
Membre depuis 20 ans
Xavier07
271
Posteur·euse AFfamé·e
Membre depuis 22 ans
delchambre
3197
Squatteur·euse d’AF
Membre depuis 19 ans
delchambre
3197
Squatteur·euse d’AF
Membre depuis 19 ans
Hors sujet :
Citation de chapolin :#JeSuisCharlyOledOléd
Dernier Youtube : https://bit.ly/3fArwjO
Le groupe: Khohd (Post Metal / Post Rock)
Les trucs persos: remix&versions persos - Compos et Compotines AF - Mixages "blues/jazz/rock" - Vidéos kitch
synthwalker
12095
Rédacteur·trice
Membre depuis 21 ans
- < Liste des sujets
- Charte