Fréquence d'éch. qui change toute seule sous CubaseSX! taille des buffer?
- 17 réponses
- 9 participants
- 1 979 vues
- 1 follower
Afficher le sujet de la discussion
- 1
- 2
koyote
70
Posteur·euse AFfranchi·e
Membre depuis 21 ans
Et aucun posseseur de la DSP24 n'a encore essayé d'installé le driver de la At010?
Parrait que ça marche pas mal ( meme un gain de 2ms de latence en 44.1.... )
Bon....pour ceux que ça interesse qd meme ceci pourrait peut etre vous aidez ( c'est extrait du forum de Hoontech ( http://www.hoontech.com/board/cgi-bin/CrazyWWWBoard.cgi?db=STA1&mode=read&num=25082&page=6&category=&ftype=6&fval=&backdepth=1 )perso j'esite deja a le faire, mais en plus avec des explications en anglais
...)however, here it is :
As Claus has said, this isn't for everyone but if your game, it's working excellently for me...
You need to have a dual boot system for this to work, very common amongst PC musicians and for those that don't use this I would suggest they do as a matter of course. Biggest benifit is that you have a dedicated partition and related OS for music with no games, no office and ZERO chances of viruses, the biggest downfall is you have to wait for your pc to boot to play games or do office stuff...
OK so on your Internet OS, instal the ADSP24 drivers like usual,
On your Music OS instal the AT010 drivers (get em at www.esi-pro.com)These drivers treat the ADSP24 as 3 different cards so you'll have to point XP to the drivers 3 times.
Once re-booted...
You need to set the driver to RBus I/O in the config page.
You also need to tell the driver to clock to RBus, I'm digitaly clocking my card from the Sp/dif so in the AT010 control panel I have it set to the second last option 'External In'. Also as I'm using AES/EBU select the 'pro' radio button under Sp/Dif Mode.
Done!
Hardware monitoring works but you have to hit the Mute button under the master faders, it lights up as MAIN when it's on, took me a while to work this one out, surely a mute button is a mute button?
Just boot into your Net OS with the power on your C-Port - SystemIII- M -Port, and the Hoontech driver will initialise the rack as normal. Do your Email whatever... then Warm boot (Use Restart not Turn off) into your Music OS, the Rack is still initialised and everything works better than is ever did before.
Hope this works for everyone as well as it is for me.
Parrait que ça marche pas mal ( meme un gain de 2ms de latence en 44.1.... )
Bon....pour ceux que ça interesse qd meme ceci pourrait peut etre vous aidez ( c'est extrait du forum de Hoontech ( http://www.hoontech.com/board/cgi-bin/CrazyWWWBoard.cgi?db=STA1&mode=read&num=25082&page=6&category=&ftype=6&fval=&backdepth=1 )perso j'esite deja a le faire, mais en plus avec des explications en anglais
...)however, here it is :As Claus has said, this isn't for everyone but if your game, it's working excellently for me...
You need to have a dual boot system for this to work, very common amongst PC musicians and for those that don't use this I would suggest they do as a matter of course. Biggest benifit is that you have a dedicated partition and related OS for music with no games, no office and ZERO chances of viruses, the biggest downfall is you have to wait for your pc to boot to play games or do office stuff...
OK so on your Internet OS, instal the ADSP24 drivers like usual,
On your Music OS instal the AT010 drivers (get em at www.esi-pro.com)These drivers treat the ADSP24 as 3 different cards so you'll have to point XP to the drivers 3 times.
Once re-booted...
You need to set the driver to RBus I/O in the config page.
You also need to tell the driver to clock to RBus, I'm digitaly clocking my card from the Sp/dif so in the AT010 control panel I have it set to the second last option 'External In'. Also as I'm using AES/EBU select the 'pro' radio button under Sp/Dif Mode.
Done!
Hardware monitoring works but you have to hit the Mute button under the master faders, it lights up as MAIN when it's on, took me a while to work this one out, surely a mute button is a mute button?
Just boot into your Net OS with the power on your C-Port - SystemIII- M -Port, and the Hoontech driver will initialise the rack as normal. Do your Email whatever... then Warm boot (Use Restart not Turn off) into your Music OS, the Rack is still initialised and everything works better than is ever did before.
Hope this works for everyone as well as it is for me.
Kiss Kool
1809
AFicionado·a
Membre depuis 22 ans
skao78
17
Nouvel·le AFfilié·e
Membre depuis 21 ans
Kiss Kool
1809
AFicionado·a
Membre depuis 22 ans
21decibel
65
Posteur·euse AFfranchi·e
Membre depuis 21 ans
Antas
47
Nouvel·le AFfilié·e
Membre depuis 21 ans
Bacool
142
Posteur·euse AFfiné·e
Membre depuis 22 ans
koyote
70
Posteur·euse AFfranchi·e
Membre depuis 21 ans
Bon bobn bon...et pour revenir a cette fréquence d'échantillonage qu'a la bougeote sous sx 
- < Liste des sujets
- Charte
- 1
- 2