- < Liste des sujets
1 Posté le 20/08/2015 à 14:43:26
Alors, juste pour info, le MARKBASS Compressore (couleurs noir & jaune - attribué pour la basse) et le DV MARK Compressore (couleur blanc & noir attribué à la guitare) serait en fait au départ les mêmes et pour basse !
Le coffret serait différent et seule la lampe aurait été changée pour la guitare sur le D.V.M. à savoir une ECC81 (12at7) en remplacement de la ECC82 (12au7) pour la basse.
Après, il ne resterait plus qu'à pratiquer des réglages concernant une guitare en différence de ceux réservés à la basse.
Alors pour les bricoleurs qui ont un home studio, juste installer un dériveur avec 2 embases tube et le retour est joué, pas besoin d'en acheter un 2ème !
En parlant d'acheter, TOTO a déjà sorti la version 2015 (https://www.thomann.de/fr/markbass_compressore.htm), ce serait exactement la même () que la précédente mais avec un coffret différent, à savoir, plus simple, très simple, soft disent certains ...
Pour plus d'info, CYRUS l'extra-terrestre a monté un blog sur la compression, tout y est superbement bien expliqué, oui, je sais, c'est en english, mais bon ... http://www.OVNIlab.com/faq.shtml
Allez, Keep on Feelin' !
- - - > Pour l'english, click here ! https://translate.google.fr/?hl=fr#auto/fr/
* * * * * * * Pour le MARKBASS * * * * * * *
Markbass Compressore : This tube comp comes from an Italian brand known for their amplifiers. The brand "DVMark" is their line aimed at selling to guitarists, and the DVMark comp pedal is exactly the same as the Markbass internally, just with different cosmetics on the box.
First, I must say it has almost no noise! Even at high compression settings the noise is low, which is amazing for a tube pedal. The tone is very smooth and clean, not very colored by the tube, although it does seem to add a nice "thickness" to the mids. There is no loss of lows, and the low end sounds big and full. The useful highs are not rolled off, but the upper end is kind of "dark" sounding, as though the very highest frequencies may be cut off. Also under heavy constant compression, the tone can get muddy. But under normal use it is clean and articulate. The action is quite smooth, and has a remarkable range: both from gentle to limiting, and from "invisible" to a very funky squashed effect, all found with different threshold and ratio settings. It has a full range of controls, and each of them is quite effective.
It can handle any instrument level of signal you can throw at it without distorting. It does a pretty good job as a peak limiter, although if you hit it with a strong spike over the threshold, the signal will "dip and swell" noticeably, which some people might not want. This can be avoided with a higher threshold or less extreme spikes in your playing, or you can use it as a cool funky effect.
Another remarkable thing about this pedal is that the tube itself actually performs the compression. In most other so-called tube comps, the tube they use is just a gain stage following a solid-state (usually optical) compression element. You typically only see "true" tube compression in a few high-end studio processors like the Manley Vari-Mu. I think the use of the tube as the compression element, instead of just a gain stage, contributes to the low noise and uncommon action of this pedal.
I A/B compared it against the T-Rex Squeezer, which is a direct competitor since it costs a similar amount, has one tube, has the same controls, and uses exactly the same power supply. The tone of the T-Rex is brighter in the highs, while the Markbass has fuller mids. The T-Rex has some extra hiss, while the MB is remarkably quiet. The T-Rex is much smaller, but not as ruggedly-built as the MB. I also A/B'ed it against the Maxon RCP-660, which is another tube comp pedal; the Maxon has brighter highs and a more tube-colored tone, but the MB is superior in every other way.
There are two downsides: One, this unit is quite large--about the size of the Ashdown and Trace Elliot pedals, slightly bigger than two standard Boss pedals side by side. Two, it requires a 12V DC power supply that can supply at least 500 mA current (very typical for tube pedals). However if you can live with those drawbacks, then this comp is pure gold. I would put it up against a high-end rack unit any day.
To access the tube you have to undo six screws and three nuts. The construction is very rugged, and the footswitch is "true bypass".
[ Dernière édition du message le 20/08/2015 à 14:51:05 ]
2 Posté le 21/08/2015 à 13:57:21
à noter : un avis donné par Davidsinrocks sur la page Thotho.