OS v 1.06 disponible !
- 1 réponse
- 2 participants
- 2 793 vues
- 2 followers
CO5MA
1253
AFicionado·a
Membre depuis 21 ans
Sujet de la discussion Posté le 03/05/2013 à 13:16:55OS v 1.06 disponible !
List of changes from Analog Four OS 1.05 to 1.06
Changes
Trigging of ENV/LFO can now be individually activated on trigless locks on the NOTE screen. Previously only available on trigs.
A new mode has been added to the CV track, CLOCK. CLOCK sends periodical pulses with a period synced to the sequencer step length and divided down by the parameter CLK.
A new pattern setting is available, CHNG, a modulo position at which the sequencer will change to the next cued or chained pattern.
Track level can now be controlled via MIDI CC 95 or MIDI NRPN (MSB=1, LSB=100).
Bug fixes
Envelope 1 on the CV track only outputted envelope during the attack phase. Fixed.
Erasing a specific parameter lock during real-time recording was incorrectly implemented with key combination [function]+[data ENTRY] instead of [no]+[data ENTRY], as described in the
manual. Fixed.
List of changes from Analog Four OS 1.04C to 1.05
Changes
A new sub oscillator type is available; 5th. This new sub oscillator plays a 5th component below the corresponding oscillator pitch (i e 7 semitones below the oscillator pitch). It can be used to create chord sounds using only one synth voice.
The sequencer can now be paused by pressing [play]. The playback position is preserved and pressing [play] again resumes playing.
When altering the NORMAL pattern scale length, all ADVANCED track scale lengths are now set to the same length as well. This makes the change from NORMAL to ADVANCED more transparent.
Held mini keyboard notes (and MIDI auto channel notes) are no longer interrupted when changing track
or changing keyboard octave.
3(9)
When clearing or pasting patterns while in pattern selection mode ([bank] + [grid] + [play]), a timeout window now preceeds the operation. If key combination is released before the timeout period, the operation is cancelled. This reduces the risk of losing data by mistake when selecting patterns.
The active position within the chain (and song) are now preserved when powering off the machine.
A new global option is available; KIT RELOADS ON CHG. When enabled, this will cause kits to reload to their saved state automatically as soon as a new kit becomes active. The option is found in the SEQUENCER CONFIG global menu.
Real time recording is now done using micro timing. You can enable or disable this functionality via the
global option QUANTIZE LIVE REC, found in the SEQUENCER CONFIG global menu.
To quantize recorded notes non-destructively, use the quantize parameters in the NOTES SETUP menu.
To quantize recorded notes destructively, the MICRO TIMING parameter can be erased while live recording by pressing [function] + [encoder D] on the NOTE parameter page (similarly to how parameter locks are erased).
If both CLOCK RECEIVE and TRANSPORT RECEIVE are selected the unit will wait for clock after receiving start or continue messages for 16 seconds before considering external sync lost. This, for example, allows for preroll in sequencers not starting clock until preroll is completed.
If only TRANSPORT RECEIVE is enabled the machine will start as soon as possible after receiving start or continue.
When external sync is lost the sequencer enters pause and changes the tempo setting to the last detected external tempo.
Note slide and bend is now available on the CV track. Use the new bend depth and note slide time parameters on the CV track to control the behavior.
The filter default settings have been changed and now use HP2 in the multi mode filter.
When using pattern change modes DIRECT START or DIRECT JUMP, the change is now done immediately on grid key press rather than grid key release. Also, the possibility to create chains by using multiple grid keys is now disabled while using the direct change pattern modes, to reduce the risk of altering the chain while performing with these functions.
When using pattern change mode DIRECT JUMP to jump into a pattern with shorter length, the
position is now wrapped into the new pattern, instead of starting the new pattern from the beginning.
When going from SONG MODE or CHAIN MODE into pattern mode, the chain cursor is now moved to the currently playing pattern.
When sending DIN sync pressing [play] manually will now delay clock start for 2 milliseconds to allow synced devices time to react. When double clicking [stop] the unit will prepare the devices for start and hold clock until [play] is pressed or a MIDI start message is received and no delay is necessary.
4(9)
Bug fixes
Previewing steps with their parameter locks applied only worked on steps with sound locks, it now works also on steps without sound locks.
Performance parameters used NRPN MSB 1 instead of NRPN MSB 0. Fixed.
Ext.R. Volume parameter used CC 29 instead of CC 31. Fixed.
CV Env1. Decay used CC 113 instead of CC 109. Fixed.
Held notes could get stuck during pattern change if the pattern change implicitly changed keyboard octave. Fixed.
When live recording short consecutive notes, the recorded trigs could sometimes be converted to trigness locks. Fixed.
When the machine was turned off with an active pattern other than the first pattern in the active chain,
the active kit settings would sometimes be restored to the wrong slot during boot. Fixed.
When changing between patterns that used different kits, the kit changes would occur too early. Fixed.
Sequencer note slide did not work properly when externally synced. Fixed.
List of changes from Analog Four OS 1.04B to 1.04C
Bug fixes
Notes with infinite length did not get trigged by the sequencer. Fixed.
List of changes from Analog Four OS 1.04 to 1.04B
Bug fixes
Reception of MIDI NRPN data and reception of LSB part of high-res CC params did not work satisfactorily. Fixed.
When pasting a performance setup, not all performance parameters were included. Fixed.
When using slide, the envelope trig of an adjacent, non legato note only occurred randomly. Fixed.
Changes
Trigging of ENV/LFO can now be individually activated on trigless locks on the NOTE screen. Previously only available on trigs.
A new mode has been added to the CV track, CLOCK. CLOCK sends periodical pulses with a period synced to the sequencer step length and divided down by the parameter CLK.
A new pattern setting is available, CHNG, a modulo position at which the sequencer will change to the next cued or chained pattern.
Track level can now be controlled via MIDI CC 95 or MIDI NRPN (MSB=1, LSB=100).
Bug fixes
Envelope 1 on the CV track only outputted envelope during the attack phase. Fixed.
Erasing a specific parameter lock during real-time recording was incorrectly implemented with key combination [function]+[data ENTRY] instead of [no]+[data ENTRY], as described in the
manual. Fixed.
List of changes from Analog Four OS 1.04C to 1.05
Changes
A new sub oscillator type is available; 5th. This new sub oscillator plays a 5th component below the corresponding oscillator pitch (i e 7 semitones below the oscillator pitch). It can be used to create chord sounds using only one synth voice.
The sequencer can now be paused by pressing [play]. The playback position is preserved and pressing [play] again resumes playing.
When altering the NORMAL pattern scale length, all ADVANCED track scale lengths are now set to the same length as well. This makes the change from NORMAL to ADVANCED more transparent.
Held mini keyboard notes (and MIDI auto channel notes) are no longer interrupted when changing track
or changing keyboard octave.
3(9)
When clearing or pasting patterns while in pattern selection mode ([bank] + [grid] + [play]), a timeout window now preceeds the operation. If key combination is released before the timeout period, the operation is cancelled. This reduces the risk of losing data by mistake when selecting patterns.
The active position within the chain (and song) are now preserved when powering off the machine.
A new global option is available; KIT RELOADS ON CHG. When enabled, this will cause kits to reload to their saved state automatically as soon as a new kit becomes active. The option is found in the SEQUENCER CONFIG global menu.
Real time recording is now done using micro timing. You can enable or disable this functionality via the
global option QUANTIZE LIVE REC, found in the SEQUENCER CONFIG global menu.
To quantize recorded notes non-destructively, use the quantize parameters in the NOTES SETUP menu.
To quantize recorded notes destructively, the MICRO TIMING parameter can be erased while live recording by pressing [function] + [encoder D] on the NOTE parameter page (similarly to how parameter locks are erased).
If both CLOCK RECEIVE and TRANSPORT RECEIVE are selected the unit will wait for clock after receiving start or continue messages for 16 seconds before considering external sync lost. This, for example, allows for preroll in sequencers not starting clock until preroll is completed.
If only TRANSPORT RECEIVE is enabled the machine will start as soon as possible after receiving start or continue.
When external sync is lost the sequencer enters pause and changes the tempo setting to the last detected external tempo.
Note slide and bend is now available on the CV track. Use the new bend depth and note slide time parameters on the CV track to control the behavior.
The filter default settings have been changed and now use HP2 in the multi mode filter.
When using pattern change modes DIRECT START or DIRECT JUMP, the change is now done immediately on grid key press rather than grid key release. Also, the possibility to create chains by using multiple grid keys is now disabled while using the direct change pattern modes, to reduce the risk of altering the chain while performing with these functions.
When using pattern change mode DIRECT JUMP to jump into a pattern with shorter length, the
position is now wrapped into the new pattern, instead of starting the new pattern from the beginning.
When going from SONG MODE or CHAIN MODE into pattern mode, the chain cursor is now moved to the currently playing pattern.
When sending DIN sync pressing [play] manually will now delay clock start for 2 milliseconds to allow synced devices time to react. When double clicking [stop] the unit will prepare the devices for start and hold clock until [play] is pressed or a MIDI start message is received and no delay is necessary.
4(9)
Bug fixes
Previewing steps with their parameter locks applied only worked on steps with sound locks, it now works also on steps without sound locks.
Performance parameters used NRPN MSB 1 instead of NRPN MSB 0. Fixed.
Ext.R. Volume parameter used CC 29 instead of CC 31. Fixed.
CV Env1. Decay used CC 113 instead of CC 109. Fixed.
Held notes could get stuck during pattern change if the pattern change implicitly changed keyboard octave. Fixed.
When live recording short consecutive notes, the recorded trigs could sometimes be converted to trigness locks. Fixed.
When the machine was turned off with an active pattern other than the first pattern in the active chain,
the active kit settings would sometimes be restored to the wrong slot during boot. Fixed.
When changing between patterns that used different kits, the kit changes would occur too early. Fixed.
Sequencer note slide did not work properly when externally synced. Fixed.
List of changes from Analog Four OS 1.04B to 1.04C
Bug fixes
Notes with infinite length did not get trigged by the sequencer. Fixed.
List of changes from Analog Four OS 1.04 to 1.04B
Bug fixes
Reception of MIDI NRPN data and reception of LSB part of high-res CC params did not work satisfactorily. Fixed.
When pasting a performance setup, not all performance parameters were included. Fixed.
When using slide, the envelope trig of an adjacent, non legato note only occurred randomly. Fixed.
[ Dernière édition du message le 03/05/2013 à 13:20:21 ]
leonard de Leonard
482
Posteur·euse AFfamé·e
Membre depuis 21 ans
2 Posté le 03/05/2013 à 14:13:55
- < Liste des sujets
- Charte