carte son audiofire 4 pas reconnue sous ubuntustudio 10

Ok Ttoine je te passe la main !

Oui et je vois ça et particulier dans les commentaires :

oui merci ttoine, c'est justement là que j'ai vu qu'il fallait la version libraw1394-2.0.5

merci à tous j'essaye ça et je vous tiens au courant

merci encore

Bon je suis un peu désemparé car je viens d'effectuer  les manips préconisées par chapolin800, tout semblait bien se passer mais là je viens de faire un ffado-diag et j'obtiens

FFADO diagnostic utility 0.1
============================
(C) 2008 Pieter Palmers


=== CHECK ===
Base system...
kernel version............ 2.6.32-24-generic
FIXME: implement test for RT kernel
RT patched............... False
old 1394 stack present.... True
old 1394 stack loaded..... True
old 1394 stack active..... True
new 1394 stack present.... True
new 1394 stack loaded..... False
new 1394 stack active..... False
/dev/raw1394 node present. True
/dev/raw1394 permissions.. True
Prerequisites (dynamic at run-time)...
gcc................ gcc (Ubuntu 4.4.3-4ubuntu5) 4.4.3
g++................ sh: g++: not found
PyQt............... sh: pyuic: not found
jackd.............. jackd version 0.118.0 tmpdir /dev/shm protocol 24
path............. /usr/bin/jackd
flags............  -ljack -lpthread -lrt
libraw1394......... Package libraw1394 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libraw1394.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libraw1394' found
flags............ Package libraw1394 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libraw1394.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libraw1394' found
libavc1394......... Package libavc1394 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libavc1394.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libavc1394' found
flags............ Package libavc1394 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libavc1394.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libavc1394' found
libiec61883........ Package libiec61883 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libiec61883.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libiec61883' found
flags............ Package libiec61883 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libiec61883.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libiec61883' found
libxml++-2.6....... Package libxml++-2.6 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libxml++-2.6.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libxml++-2.6' found
flags............ Package libxml++-2.6 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libxml++-2.6.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libxml++-2.6' found
dbus-1............. Package dbus-1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `dbus-1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'dbus-1' found
flags............ Package dbus-1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `dbus-1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'dbus-1' found
Prerequisites (static at compile-time)...
gcc................ gcc (Ubuntu 4.4.3-4ubuntu5) 4.4.3
g++................ g++ (Ubuntu 4.4.3-4ubuntu5) 4.4.3
PyQt............... sh: pyuic: not found
jackd.............. sh: jackd: not found
path.............
flags............ Package jack was not found in the pkg-config search path.
libraw1394......... 2.0.4
flags............  -lraw1394
libavc1394......... Package libavc1394 was not found in the pkg-config search path.
flags............ Package libavc1394 was not found in the pkg-config search path.
libiec61883........ 1.2.0
flags............  -liec61883 -lraw1394
libxml++-2.6....... 2.26.1
flags............ -pthread -I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  -pthread -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lsigc-2.0 -lgthread-2.0 -lrt -lglib-2.0
dbus-1............. 1.2.16
flags............ -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include  -L/lib -ldbus-1 -lpthread -lrt
Hardware...
Host controllers:
01:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) [104c:8020] (prog-if 10)
Subsystem: Texas Instruments Device [104c:8010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fc004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fc000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394

CPU info:
processor    : 0
vendor_id    : AuthenticAMD
cpu family    : 15
model        : 107
model name    : AMD Athlon(tm) Dual Core Processor 5000B
stepping    : 2
cpu MHz        : 2600.000
cache size    : 512 KB
physical id    : 0
siblings    : 2
core id        : 0
cpu cores    : 2
apicid        : 0
initial apicid    : 0
fdiv_bug    : no
hlt_bug        : no
f00f_bug    : no
coma_bug    : no
fpu        : yes
fpu_exception    : yes
cpuid level    : 1
wp        : yes
flags        : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch
bogomips    : 5224.02
clflush size    : 64
cache_alignment    : 64
address sizes    : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc 100mhzsteps

processor    : 1
vendor_id    : AuthenticAMD
cpu family    : 15
model        : 107
model name    : AMD Athlon(tm) Dual Core Processor 5000B
stepping    : 2
cpu MHz        : 2600.000
cache size    : 512 KB
physical id    : 0
siblings    : 2
core id        : 1
cpu cores    : 2
apicid        : 1
initial apicid    : 1
fdiv_bug    : no
hlt_bug        : no
f00f_bug    : no
coma_bug    : no
fpu        : yes
fpu_exception    : yes
cpuid level    : 1
wp        : yes
flags        : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch
bogomips    : 5224.02
clflush size    : 64
cache_alignment    : 64
address sizes    : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc 100mhzsteps

Configuration...
IRQ information
Hardware Interrupts:
--------------------
IRQ    0: PID:  None, count:           [45, 45], Sched None (priority None), drivers: ['timer']
IRQ    1: PID:  None, count:       [1223, 1223], Sched None (priority None), drivers: ['i8042']
IRQ    4: PID:  None, count:             [0, 0], Sched None (priority None), drivers: ['']
IRQ    6: PID:  None, count:             [0, 0], Sched None (priority None), drivers: ['floppy']
IRQ    7: PID:  None, count:             [1, 1], Sched None (priority None), drivers: ['parport0']
IRQ    8: PID:  None, count:             [0, 0], Sched None (priority None), drivers: ['rtc0']
IRQ    9: PID:  None, count:             [0, 0], Sched None (priority None), drivers: ['acpi']
IRQ   14: PID:  None, count:         [227, 227], Sched None (priority None), drivers: ['pata_amd']
IRQ   15: PID:  None, count:             [0, 0], Sched None (priority None), drivers: ['pata_amd']
IRQ   16: PID:  None, count:   [144253, 144253], Sched None (priority None), drivers: ['nvidia']
IRQ   17: PID:  None, count:             [1, 1], Sched None (priority None), drivers: ['ohci1394']
IRQ   21: PID:  None, count:     [59641, 59641], Sched None (priority None), drivers: ['ohci_hcd:usb2']
IRQ   22: PID:  None, count:     [34715, 34715], Sched None (priority None), drivers: ['ehci_hcd:usb1']
IRQ   23: PID:  None, count:             [4, 4], Sched None (priority None), drivers: ['sata_nv']
IRQ   25: PID:  None, count:   [777177, 777177], Sched None (priority None), drivers: ['eth0']

Software Interrupts:
--------------------


=== REPORT ===
FireWire kernel drivers:
[PASS] Kernel modules present and correctly loaded.
[PASS] /dev/raw1394 node present and accessible.

Alors le point positif c'est que le kernel modules et chargé correctement par contre, il y a toujours les mêmes fichiers  :

flags............ Package dbus-1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `dbus-1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'dbus-1' found

J'ai vu dans les ffado-tools qu'il y a un ffado-fireworks-downloader ( j'ai vu sur alsa que fireworks etati le chipset de la carte echo audiofire4) y aurait il quelque chose à faire? j'avoue ne pas avoir bien compris comment ça fonctionne. j'ai trouvé ça via google mais j'avoue etre un peu perdu.

https://bbs.archlinux.org/viewtopic.php?pid=740385

Je ne dirais que 4 mots "A l'aide, je craque !"

merci d'avance

Hum,

Rappelle moi, tu es sur quelle version d'Ubuntu ?? D'autre part, oublie Alsa ou Pulse Audio pour les cartes son firewire, seul le pilote ffado sous jack fonctionne. Si tu es sous Ubuntu Hardy LTS, ça fonctionne très bien, faut juste sélectionner le bon pilote (firewire ou freebob) dans les paramètres de Jack. Sur la version courante (10.04 LTS) ya trop de bidouille pour un débutant pour le moment, faudra attendre octobre avec la prochaine version.

Toine

Bonjour ttoine,

oui effectivement c'est la 10.04 LTS que j'ai installé. je vais installé donc la 8.04.1

je croise les doigts ! je vous tiens au courant

Ttoine,

Juste yn précision : tu veux dire attendre la prochaine version d'Ubuntu ou la prochaine version de ffado ?

Alors voila: j'ai installé la version Hardy heron comme preconisé par ttoine et j'ai ouvert jack pour mettre firewire. Il ne voit pas ma carte. je lance jack et j'obtiens ce message :

16:32:32.458 Patchbay deactivated.
16:32:32.560 Statistics reset.
16:32:32.575 Could not open ALSA sequencer as a client. ALSA MIDI patchbay will be not available.
ALSA lib seq_hw.c:457:(snd_seq_hw_open) open /dev/snd/seq failed: Aucun fichier ou dossier de ce type
16:32:36.102 Startup script...
16:32:36.103 artsshell -q terminate
16:32:36.526 Startup script terminated with exit status=256.
16:32:36.527 JACK is starting...
16:32:36.527 /usr/bin/jackd -R -dfirewire -r44100 -p128 -n2
16:32:36.535 JACK was started with PID=6400.
jackd: unknown driver 'firewire'
16:32:36.540 JACK was stopped with exit status=1.
16:32:36.540 Post-shutdown script...
16:32:36.541 killall jackd
jackd: aucun processus tué
16:32:36.951 Post-shutdown script terminated with exit status=256.
16:32:38.684 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.

J'ai essayé de faire un ffado-diag dans un terminal et là le fichier est introuvable.

là je sais vraiment plus quoi faire! 

Il faut peut-être installer ffado ? et libfirewire ?

oui c'est e que je pense . je le trouve pas via synaptic donc je vais le télécharger. j'ai vu ça :

https://forum.ubuntu-fr.org/viewtopic.php?id=259586

Excellentissimet ce lien :)!!