Je viens d'acquérir un 2x / comment synchroniser les arpégiateurs ?

salut J'ai reproduit exactement les coseils du site de la page Clavia  dont voila le lien

http://www.clavia.se/faq/nordlead.htm

ce qui nous interesse c'est cela :

Q: My Nord Lead doesn't respond correctly to MIDI Controllers. What's wrong?
A: 1. First, make sure the Nord Lead is set to send and receive MIDI Controllers. Press and hold SHIFT and press PRG.CTRL twice. Press the Up button until the display reads 'C.on'. Also, make sure the Global MIDI channel is not set to the same as any of the Slot's MIDI channels. On the Nord Lead, connect MIDI Out directly to MIDI in. Set the Nord Lead to Local Off. If the Nord Lead responds correctly to knob changes etc., the problem is probably somewhere else in the MIDI chain.

2. If you use a sequencer, check that the sequencer receives and sends MIDI Controllers. There is usually a Filter setting for this in the program.

Q: How do I sync the Nord Lead LFOs/Arpeggiator to MIDI clock?
A: You can only sync the LFO/Arpeggiator restart. In between the restarts, the LFO/Arpeggiator runs at the rate set with the Rate knob. There are several ways to sync the LFO/Arpeggiator restart to external MIDI clock. Please, see the respective User Manuals on pages 61-62 (Nord Lead 1/Rack 1) or 63-64 (Nord Lead 2/Rack 2) for more details.

je n utilise qu un cable midi qui sort de mon x2 sur midi out vers mon sequenceur midi in

et je t assure que si je joue une note sur mon x2 elle s arpege direct a mon sequenceur

assure toi bien que ton sequenceur est en position syncro!!!

tiens moi au jus, le plaisir de jouer syncro decuple le fun....

Namaste//yuca