Petit récapitulatif des évolutions d'OS

Citation :
List of changes from Machinedrum SPS-1 OS 1.29d to 1.30
--------------------------------------------------------

Updates
-------

- General -
Holding Function and pressing Classic/Extended loads the current kit,
replicating the same functionality as Kit-Load-Enter. For power users
only, use with care, all unsaved changes are lost (still accessible in
the UNDO KIT).


Bugfixes
--------

- Song Mode -
When holding Function in song mode the graphics got inverted and could
stayed inverted indefinitely. Fixed.

- UW Sample Manager -
Send ALL samples did not function properly, only the first sample was
sent. Fixed.


------------------------
* Previous update info *
------------------------


List of changes from Machinedrum SPS-1 OS 1.29c to 1.29d
--------------------------------------------------------

Bugfixes
--------

- General -
The SPS-1 could boot believing it was an SPS-1UW and by initiating
sample memory remove the bootstrap which can only be restored by
factory service. Fixed.

This affected all versions of OS 1.29,
so please upgrade to this one if you are using SPS-1!!!


List of changes from Machinedrum SPS-1 OS 1.29b to 1.29c
--------------------------------------------------------

Updates
-------
None.


Bugfixes
--------

- General -
When performing undo pattern the first kit was always loaded no matter
the original kit used. Fixed.

- UW -
When loading samples with a max value between -0.78 dB and -12 dB the
highest sample value could be misinterpreted as a zero, resulting in
clicks in the sample. Fixed.

The RAM machines could under certain circumstances generate a crackling
sound. Fixed.

- Song Mode -
When loading a song with a longer row count and using the mini browser
to navigate the song it was not possible to go to a row below the
number of rows of the previous song until you entered the song edit
window. Fixed.

- Live Rec -
Live recording sometimes misplaced notes on adjacent note position.
Fixed.

- CTR-machines -
The CTR-AL and CTR-8P did not function well in local off, and when
recorded on a software sequencer. CTR-AL did send too much MIDI.
CTR-8P did not respond properly on incoming MIDI. Fixed.



List of changes from Machinedrum SPS-1 OS 1.20/1.29 to 1.29b
------------------------------------------------------------

Updates
-------
None.


Bugfixes
--------

-General-
When trigging a track manually with the trig keys and then pressing
play a lock on the first position of the pattern could be lost. Fixed.

When clearing a single track the machine loaded on track 1 was lost.
Fixed.

Undo clear track should only be possible to the track that was
cleared. Fixed.

Clear of consecutive single tracks was not possible due to above.
Fixed.

When holding Function and changing to a track with level set to 0 an
inverted block that did not go away was displayed in the level field.
Fixed.

When receiving MIDI Control Change to control one of the 8 visible
parameters the value was not displayed correctly after no more CC was
received and the numeric value disappeared. Fixed.

When in External sync the swing settings could behave unpredictable.
Fixed.


-Pattern Player-
When changing pattern length the pattern could be played with old
length once. Fixed.

When pasting a pattern with different length the pattern could be
played with old length once. Fixed.

When coming from Song Mode to Pattern Mode and in stop or pause the
pattern length was not properly updated. Fixed.


-Song Mode-
Song mute settings ignored for the first note on first row of song,
and on the first note on a row played after changing row with the
arrow keys + enter/yes. Fixed.

Locks for the first note on first row of song ignored, and on the
first note on a row played after changing row with the arrow keys +
enter/yes. Fixed.


-LFO-
When assigning an LFO from a track with a standard machine to a track
with a MIDI Machine or the CTR-8P machine the second LFO parameter
PARAM did not get the correct name. Fixed.


-Global-
When changing global slots some sync settings was not updated. Fixed.


-Sync-
When changing from External sync to internal and no fallback has
happened the tempo was not adjustable. Fixed.

When pressing stop multiple times and in stop the tempo of the sent
timing clock was momentarily increased. Fixed.


-MIDI Machines-
MIDI Machines did not work properly without lots of locks.
Sorry about that!
Fixed.

MIDI Machines did not swing. Fixed.


-CTR-8P-
When changing to a kit contain a CTR-8P machine the settings from the
previous machine loaded on that track was used for the first trig,
leading to unpredictable sound from other tracks. Fixed.