La CR 78 et la TR 606 !

Firmware 1.20 is online:
Roland - TR-8 | Rhythm Performer

From the TR-8 Update pdf:

Citation :

Originally Posted by Roland
Contents of Ver. 1.20

Additional sounds
The sounds of the TR-606 have been added.
* These sounds are added only if the 7X7-TR8 Drum Machine Expansion is installed.

Switching the cymbal parameter operating mode
We’ve added a HIHAT Link mode that lets you operate the CH (closed hi-hat) and OH (open hi-hat) parameters simultaneously.
This mode makes it possible to adjust the master tuning of cymbaltype sounds.
* (TR-606/TR-808 sounds only)

1. While holding down the [ptn SELECT] button, turn on the power.
2. Press pad [8] to switch the operating mode.
ON (lit)
Use the CH [tune] knob to simultaneously adjust the tuning of CH and OH. The CH [level] fader simultaneously adjusts the volume of CH and OH.
The OH [tune] knob adjusts the master tuning of cymbaltype sounds (TR-606/TR-808 sounds only).
OFF (unlit) The CH/OH tuning and volume are adjusted by each controller (default setting).

Fixed a problem when the sequencer is running
. We fixed a problem that had caused notes to sometimes be unintentionally delayed.
. We fixed a problem that had caused data differing from that listed in the MIDI implementation chart to be output when using alternate sounds.

Fixed a problem in INST PLAY
We fixed a problem that had caused the wrong MIDI data to be output when the ROLL button is operated while muted.

Fixed a problem in SIDE CHAIN operation
We fixed a problem that had caused the SD (snare drum) COMP to stop working when the SIDE CHAIN type is set to 4 or 7.

With this update, there will be a price raise, but we will offer 7X7-TR8 by the current price.

This is a limited time offer, so don’t miss it!
- Special campaign during June 17th and July 7th, 2016 (JST).
- Price
[eur] New price (After update) : 100EUR → Campaign price : 75EUR
[usd] New price (After update) : 110USD → Campaign price : 95USD

*New price (After update) will be valid from July 8th, 2016 (JST).